You should take the look at our 350-401 Test Centres simulating questions right now. You will be cast in light of career acceptance and put individual ability to display. When you apply for a job you could have more opportunities than others. The latest 350-401 Test Centres dumps collection covers everything you need to overcome the difficulty of real questions and certification exam. Accurate 350-401 Test Centres test answers are tested and verified by our professional experts with the high technical knowledge and rich experience. You can both learn useful knowledge and pass the exam with efficiency with our 350-401 Test Centres real questions easily.
CCNP Enterprise 350-401 We look forward to meeting you.
You can pass your actual 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Test Centres Exam in first attempt. As for the safety issue of 350-401 Reliable Exam Preparation exam materials you are concerned about is completely unnecessary. You can rest assured to buy and use it.
Our 350-401 Test Centres practice dumps compiled by the most professional experts can offer you with high quality and accuracy practice materials for your success. Up to now, we have more than tens of thousands of customers around the world supporting our 350-401 Test Centres exam questions. If you are unfamiliar with our 350-401 Test Centres study materials, please download the free demos for your reference, and to some unlearned exam candidates, you can master necessities by our 350-401 Test Centres training guide quickly.
So are our Cisco 350-401 Test Centres exam braindumps!
Our 350-401 Test Centres training materials are regarded as the most excellent practice materials by authority. Our company is dedicated to researching, manufacturing, selling and service of the 350-401 Test Centres study guide. Also, we have our own research center and experts team. So our products can quickly meet the new demands of customers. That is why our 350-401 Test Centres exam questions are popular among candidates. we have strong strenght to support our 350-401 Test Centres practice engine.
There are so many advantages of our 350-401 Test Centres actual exam, and you are welcome to have a try! We have put substantial amount of money and effort into upgrading the quality of our 350-401 Test Centres preparation materials, into our own 350-401 Test Centres sales force and into our after sale services.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement about a fabric access point is true?
A. It is in local mode an must connected directly to the fabric edge switch.
B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
C. It is in FlexConnect mode and must be connected directly to the fabric border node.
D. It is in local mode an must be connected directly to the fabric border node.
Answer: A
Explanation:
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric
WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html
QUESTION NO: 2
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 3
Which description of an SD-Access wireless network infrastructure deployment is true?
A. The wireless client is part of the fabric overlay.
B. The access point is part of the fabric underlay.
C. The WLC is part of the fabric underlay.
D. The access point is part the fabric overlay.
Answer: B
QUESTION NO: 4
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
Microsoft MB-230 - Time is flying and the exam date is coming along, which is sort of intimidating considering your status of review process. No other Cisco 350-401 study materials or study dumps can bring you the knowledge and preparation that you will get from the Cisco 350-401 study materials available only from Omgzlook. So you will never have to worry that the exam questions and answers will be outdated one day for our experts are always keeping on updating the Salesforce Marketing-Cloud-Account-Engagement-Specialist study materials to the most precise. Palo Alto Networks PSE-Strata - So you won’t be pestered with the difficulties of the exam any more. Omgzlook will provide all the latest and accurate exam practice questions and answers for the staff to participate in Salesforce Salesforce-MuleSoft-Developer-II certification exam.
Updated: May 28, 2022