We hope to grow with you and help you get more success in your life. The optimization of 350-401 Study Guide training questions is very much in need of your opinion. If you find any problems during use, you can give us feedback. We have free demos of the 350-401 Study Guide exam questions to download. A free trial service is provided for all customers by our 350-401 Study Guide study quiz, whose purpose is to allow customers to understand our products in depth before purchase. Our passing rate may be the most attractive factor for you.
CCNP Enterprise 350-401 We're definitely not exaggerating.
350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Study Guide exam prep sincerely hopes that you can achieve your goals and realize your dreams. The one who choose our study materials that consider our website as the top preparation material seller for 350-401 Valid Test Guide Materials study materials, and inevitable to carry all candidates the finest knowledge on exam syllabus contents. Not only that, we will provide you a free update service within one year from the date of purchase, in order to keep up the changes in the exam so that every candidates who purchase our{ ExamCode} study materials can pass the exam one time.
The existence of our 350-401 Study Guide learning guide is regarded as in favor of your efficiency of passing the exam. Our 350-401 Study Guide exam questions are supposed to help you pass the exam smoothly. Don't worry about channels to the best 350-401 Study Guide study materials so many exam candidates admire our generosity of offering help for them.
Cisco 350-401 Study Guide - Now IT industry is more and more competitive.
350-401 Study Guide study materials can expedite your review process, inculcate your knowledge of the exam and last but not the least, speed up your pace of review dramatically. The finicky points can be solved effectively by using our 350-401 Study Guide exam questions. With a high pass rate as 98% to 100% in this career, we have been the leader in this market and helped tens of thousands of our loyal customers pass the exams successfully. Just come to buy our 350-401 Study Guide learning guide and you will love it.
If you have decided to upgrade yourself by passing Cisco certification 350-401 Study Guide exam, then choosing Omgzlook is not wrong. Our Omgzlook promise you that you can pass your first time to participate in the Cisco certification 350-401 Study Guide exam and get Cisco 350-401 Study Guide certification to enhance and change yourself.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement about a fabric access point is true?
A. It is in local mode an must connected directly to the fabric edge switch.
B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
C. It is in FlexConnect mode and must be connected directly to the fabric border node.
D. It is in local mode an must be connected directly to the fabric border node.
Answer: A
Explanation:
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric
WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html
QUESTION NO: 2
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 3
Which description of an SD-Access wireless network infrastructure deployment is true?
A. The wireless client is part of the fabric overlay.
B. The access point is part of the fabric underlay.
C. The WLC is part of the fabric underlay.
D. The access point is part the fabric overlay.
Answer: B
QUESTION NO: 4
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
SAP C_TS462_2023 - So accordingly, we offer three versions of free demos for you to download. They continue to use their IT knowledge and rich experience to study the previous years exams of Cisco Huawei H19-308_V4.0 and have developed practice questions and answers about Cisco Huawei H19-308_V4.0 exam certification exam. You can feel assertive about your exam with our 100 guaranteed professional APICS CSCP-KR practice engine for you can see the comments on the websites, our high-quality of our APICS CSCP-KR learning materials are proved to be the most effective exam tool among the candidates. If you choose to sign up to participate in Cisco certification Salesforce Marketing-Cloud-Email-Specialist exams, you should choose a good learning material or training course to prepare for the examination right now. And our IBM C1000-101-KR test guide benefit exam candidates by improving their ability of coping the exam in two ways, first one is their basic knowledge of it.
Updated: May 28, 2022