If you buy our product, we will offer one year free update of the questions for you. With our software, passing 350-401 Study Guide exam will no longer be the problem. Now are you in preparation for 350-401 Study Guide exam? If so, you must be a man with targets. It is up to you to make a decision. And after you finish the 350-401 Study Guide exam questions, the scores will show out right away. It is our responsibility to relieve your pressure from preparation of 350-401 Study Guide exam.
CCNP Enterprise 350-401 Our products are just suitable for you.
CCNP Enterprise 350-401 Study Guide - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) The training materials of Omgzlook are developed by many IT experts' continuously using their experience and knowledge to study, and the quality is very good and have very high accuracy. You will get your 350-401 Exam Cram Pdf certification with little time and energy by the help of out dumps. Omgzlook is constantly updated in accordance with the changing requirements of the Cisco certification.
If you buy the Omgzlook's products, we will not only spare no effort to help you pass the certification exam, but also provide a free update and upgrade service. If the official change the outline of the certification exam, we will notify customers immediately. If we have any updated version of test software, it will be immediately pushed to customers.
Cisco 350-401 Study Guide - Omgzlook will achieve your dream.
It doesn’t matter if it's your first time to attend 350-401 Study Guide practice test or if you are freshman in the IT certification test, our latest 350-401 Study Guide dumps guide will boost you confidence to face the challenge. Our dumps collection will save you much time and ensure you get high mark in 350-401 Study Guide actual test with less effort. Come and check the free demo in our website you won’t regret it.
About Cisco 350-401 Study Guide exam, you can find these questions from different web sites or books, but the key is logical and connected. Our questions and answers will not only allow you effortlessly through the exam first time, but also can save your valuable time.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement explains why Type 1 hypervisor is considered more efficient than Type 2 hypervisor?
A. Type 1 hypervisor enables other operating systems to run on it
B. Type 1 hypervisor runs directly on the physical hardware of the host machine without relying on the underlying OS
C. Type 1 hypervisor relics on the existing OS of the host machine to access CPU, memory, storage, and network resources.
D. Type 1 hypervisor is the only type of hypervisor that supports hardware acceleration techniques
Answer: B
Explanation:
There are two types of hypervisors: type 1 and type 2 hypervisor.
In type 1 hypervisor (or native hypervisor), the hypervisor is installed directly on the physical server.
Then instances of an operating system (OS) are installed on the hypervisor. Type 1 hypervisor has direct access to the hardware resources. Therefore they are more efficient than hosted architectures.
Some examples of type 1 hypervisor are VMware vSphere/ESXi, Oracle VM Server, KVM and
Microsoft Hyper-V.
In contrast to type 1 hypervisor, a type 2 hypervisor (or hosted hypervisor) runs on top of an operating system and not the physical hardware directly. A big advantage of Type 2 hypervisors is that management console software is not required.
QUESTION NO: 2
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 3
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
CompTIA N10-008 - For all of you, it is necessary to get the Cisco certification to enhance your career path. EMC D-XTR-OE-A-24 - It can prove to your boss that he did not hire you in vain. Our updated and useful Microsoft AZ-305 will be the best tool for your success. Nutanix NCSE-Core - Our exam materials are including all the questions which the exam required. If you get a certification with our SAP C-LIXEA-2404 latest study guide, maybe your career will change.
Updated: May 28, 2022