With 350-401 Study Guide exam guide, you can perform the same computer operations as the real exam, completely taking you into the state of the actual exam, which will help you to predict the problems that may occur during the exam, and let you familiarize yourself with the exam operation in advance and avoid rushing during exams. 350-401 Study Guide test questions have a mock examination system with a timing function, which provides you with the same examination environment as the real exam. Although some of the hard copy materials contain mock examination papers, they do not have the automatic timekeeping system. Our 350-401 Study Guide exam materials can help you realize it. To those time-sensitive exam candidates, our high-efficient 350-401 Study Guide study questions comprised of important news will be best help. For we have engaged in this career for years and we are always trying our best to develope every detail of our 350-401 Study Guide study quiz.
CCNP Enterprise 350-401 This is a practice test website.
And many of our cutomers use our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Study Guide exam questions as their exam assistant and establish a long cooperation with us. Omgzlook site has a long history of providing Cisco 350-401 Exam Passing Score exam certification training materials. It has been a long time in certified IT industry with well-known position and visibility.
Provided that you lose your exam with our 350-401 Study Guide exam questions unfortunately, you can have full refund or switch other version for free. All the preoccupation based on your needs and all these explain our belief to help you have satisfactory and comfortable purchasing services on the 350-401 Study Guide study guide. We assume all the responsibilities our 350-401 Study Guide simulating practice may bring you foreseeable outcomes and you will not regret for believing in us assuredly.
Cisco 350-401 Study Guide - It is an undeniable fact.
Because of the different habits and personal devices, requirements for the version of our 350-401 Study Guide exam questions vary from person to person. To address this issue, our 350-401 Study Guide actual exam offers three different versions for users to choose from. The PC version is the closest to the real test environment, which is an excellent choice for windows - equipped computers. And this version also helps establish the confidence of the candidates when they attend the 350-401 Study Guide exam after practicing.
In recent years, many people are interested in Cisco certification exam. So, Cisco 350-401 Study Guide test also gets more and more important.
350-401 PDF DEMO:
QUESTION NO: 1
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 3
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
EMC D-SNC-DY-00 - We choose the most useful and typical questions and answers which contain the key points of the test and we try our best to use the least amount of questions and answers to showcase the most significant information. Now Cisco Salesforce Salesforce-MuleSoft-Developer-II certification test is very popular. No matter in the day or on the night, you can consult us the relevant information about our SAP P-S4FIN-2023 preparation exam through the way of chatting online or sending emails. So our IT technicians of Omgzlook take more efforts to study Pegasystems PEGACPLSA23V1 exam materials. Once the clients order our Amazon SOA-C02 cram training materials we will send the products quickly by mails.
Updated: May 28, 2022