The high pass rate and high hit rate of Cisco pdf vce can ensure you 100% pass in the first attempt. What’s more, if you fail the 350-401 Study Guide test unfortunately, we will give you full refund without any hesitation. It is the best choice to accelerate your career by getting qualified by 350-401 Study Guide certification. So just come on and join our success! As long as you are willing to exercise on a regular basis, the 350-401 Study Guide exam will be a piece of cake, because what our 350-401 Study Guide practice materials include is quintessential points about the exam. You can check out the interface, question quality and usability of our 350-401 Study Guide practice exams before you decide to buy it.
CCNP Enterprise 350-401 You can totally rely on us.
CCNP Enterprise 350-401 Study Guide - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Whatever where you are, whatever what time it is, just an electronic device, you can do exercises. Omgzlook's study guides are your best ally to get a definite success in Valid 350-401 Test Sample exam. The guides contain excellent information, exam-oriented questions and answers format on all topics of the certification syllabus.
The clients can download our 350-401 Study Guide exam questions and use our them immediately after they pay successfully. Our system will send our 350-401 Study Guide learning prep in the form of mails to the client in 5-10 minutes after their successful payment. The mails provide the links and if only the clients click on the links they can log in our software immediately to learn our 350-401 Study Guide guide materials.
Cisco 350-401 Study Guide - Actually, you must not impoverish your ambition.
Now, let us show you why our 350-401 Study Guide exam questions are absolutely your good option. First of all, in accordance to the fast-pace changes of bank market, we follow the trend and provide the latest version of 350-401 Study Guide study materials to make sure you learn more knowledge. Secondly, since our 350-401 Study Guide training quiz appeared on the market, seldom do we have the cases of customer information disclosure. We really do a great job in this career!
But our 350-401 Study Guide real exam is high efficient which can pass the 350-401 Study Guide exam during a week. To prevent you from promiscuous state, we arranged our 350-401 Study Guide learning materials with clear parts of knowledge.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement explains why Type 1 hypervisor is considered more efficient than Type 2 hypervisor?
A. Type 1 hypervisor enables other operating systems to run on it
B. Type 1 hypervisor runs directly on the physical hardware of the host machine without relying on the underlying OS
C. Type 1 hypervisor relics on the existing OS of the host machine to access CPU, memory, storage, and network resources.
D. Type 1 hypervisor is the only type of hypervisor that supports hardware acceleration techniques
Answer: B
Explanation:
There are two types of hypervisors: type 1 and type 2 hypervisor.
In type 1 hypervisor (or native hypervisor), the hypervisor is installed directly on the physical server.
Then instances of an operating system (OS) are installed on the hypervisor. Type 1 hypervisor has direct access to the hardware resources. Therefore they are more efficient than hosted architectures.
Some examples of type 1 hypervisor are VMware vSphere/ESXi, Oracle VM Server, KVM and
Microsoft Hyper-V.
In contrast to type 1 hypervisor, a type 2 hypervisor (or hosted hypervisor) runs on top of an operating system and not the physical hardware directly. A big advantage of Type 2 hypervisors is that management console software is not required.
QUESTION NO: 2
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 3
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
SAP C-SAC-2402 - So 20-30 hours of study is enough for you to deal with the exam. They always treat customers with courtesy and respect to satisfy your need on our Microsoft PL-200 exam dumps. How can our WGU Integrated-Physical-Sciences practice materials become salable products? Their quality with low prices is unquestionable. IBM S1000-007 - The statistical reporting function is provided to help students find weak points and deal with them. The questions and answers of our ISQI CT-AI_v1.0_World study tool have simplified the important information and seized the focus and are updated frequently by experts to follow the popular trend in the industry.
Updated: May 28, 2022