Many job seekers have successfully realized financial freedom with the assistance of our 350-401 Study Guide test training. All your dreams will be fully realized after you have obtained the 350-401 Study Guide certificate. Finding a good paying job is available for you. Remember this version support Windows system users only. App online version of 350-401 Study Guide exam questions is suitable to all kinds of equipment or digital devices and supportive to offline exercise on the condition that you practice it without mobile data. Whenever it is possible, you can begin your study as long as there has a computer.
CCNP Enterprise 350-401 Also, the system will deduct the relevant money.
For our professional experts simplified the content of the350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Study Guide exam questions for all our customers to be understood. In order to remain competitive in the market, our company has been keeping researching and developing of the new Accurate 350-401 Answers exam questions. We are focused on offering the most comprehensive Accurate 350-401 Answers study materials which cover all official tests.
But now, your search is ended as you have got to the right place where you can catch the finest 350-401 Study Guide exam materials. Here you can answer your doubts; you can easily pass the exam on your first attempt. All applicants who are working on the 350-401 Study Guide exam are expected to achieve their goals, but there are many ways to prepare for exam.
Cisco 350-401 Study Guide - You can directly print it on papers.
Our company has authoritative experts and experienced team in related industry. To give the customer the best service, all of our company's 350-401 Study Guide learning materials are designed by experienced experts from various field, so our 350-401 Study Guide Learning materials will help to better absorb the test sites. One of the great advantages of buying our product is that can help you master the core knowledge in the shortest time. At the same time, our 350-401 Study Guide learning materials discard the most traditional rote memorization methods and impart the key points of the qualifying exam in a way that best suits the user's learning interests, this is the highest level of experience that our most authoritative think tank brings to our 350-401 Study Guide learning materials users. Believe that there is such a powerful expert help, our users will be able to successfully pass the qualification test to obtain the qualification certificate.
If you use our study materials, you must walk in front of the reference staff that does not use valid 350-401 Study Guide real exam. And you will get the according 350-401 Study Guide certification more smoothly.
350-401 PDF DEMO:
QUESTION NO: 1
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 2
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 3
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
Our ATLASSIAN ACP-120 practice materials comprise of a number of academic questions for your practice, which are interlinked and helpful for your exam. If you are on the bus, you can choose the APP version of Amazon CLF-C02 training engine. Many details will be perfected in the new version of our Juniper JN0-223 study materials not not on the content, but also on the displays. Huawei H19-308_V4.0 - After the new version appears, we will also notify the user at the first time. In order to pass Cisco certification Cisco 300-740 exam, selecting the appropriate training tools is very necessary.
Updated: May 28, 2022