On the other hand, Software version of our 350-401 Simulator Free practice questions is also welcomed by customers, especially for windows users. As for PPT online version, as long as you download the app into your computer. You can enjoy the nice service from us. You will free access to our test engine for review after payment. How to improve your IT ability and increase professional IT knowledge of 350-401 Simulator Free real exam in a short time? Obtaining valid training materials will accelerate the way of passing 350-401 Simulator Free actual test in your first attempt. In the course of your study, the test engine of 350-401 Simulator Free actual exam will be convenient to strengthen the weaknesses in the learning process.
CCNP Enterprise 350-401 Just add it to your cart.
As a key to the success of your life, the benefits that our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Simulator Free study braindumps can bring you are not measured by money. Our Test 350-401 Engine test engine allows you to study anytime and anywhere. In addition, you can set the time for each test practice of Test 350-401 Engine simulate test.
We can assure you the proficiency of our 350-401 Simulator Free exam prep. So this is a definitive choice, it means our 350-401 Simulator Free practice quiz will help you reap the fruit of success. To lead a respectable life, our specialists made a rigorously study of professional knowledge about this 350-401 Simulator Free exam.
So the Cisco 350-401 Simulator Free exam is a great beginning.
We have applied the latest technologies to the design of our 350-401 Simulator Free exam prep not only on the content but also on the displays. As a consequence you are able to keep pace with the changeable world and remain your advantages with our 350-401 Simulator Free training braindumps. Besides, you can consolidate important knowledge for you personally and design customized study schedule or to-do list on a daily basis. As long as you follow with our 350-401 Simulator Free study guide, you are doomed to achieve your success.
One more to mention, we can help you make full use of your sporadic time to absorb knowledge and information. We would like to provide our customers with different kinds of 350-401 Simulator Free practice guide to learn, and help them accumulate knowledge and enhance their ability.
350-401 PDF DEMO:
QUESTION NO: 1
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 2
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
ASQ CQE-KR exam practice software allows you to practice on real ASQ CQE-KR questions. MuleSoft MCIA-Level-1 - This means with our products you can prepare for exams efficiently and at the same time you will get 100% success for sure. Huawei H13-334_V1.0 - You can totally rely on us. HP HPE7-A02 - And then, you can learn anytime, anywhere. Omgzlook's study guides are your best ally to get a definite success in Microsoft AI-900 exam.
Updated: May 28, 2022