Details determine success or failure, so our every detail is strictly controlled. For example, our learning material's Windows Software page is clearly, our 350-401 Simulated Test Learning material interface is simple and beautiful. There are no additional ads to disturb the user to use the Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) qualification question. Even if you have a very difficult time preparing for the exam, you also can pass your exam successfully. How do you do that? The method is very simple, that is to use Omgzlook Cisco 350-401 Simulated Test dumps to prepare for your exam. Our society needs all kinds of comprehensive talents, the 350-401 Simulated Test latest dumps can give you what you want, but not just some boring book knowledge, but flexible use of combination with the social practice.
CCNP Enterprise 350-401 You must use it before the deadline day.
Our excellent professionals are furnishing exam candidates with highly effective 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Simulated Test study materials, you can even get the desirable outcomes within one week. On the other hand, if you decide to use the online version of our Exam 350-401 Vce study materials, you don’t need to worry about no network. Convenience of the online version of our Exam 350-401 Vce study materials is mainly reflected in the following aspects: on the one hand, the online version is not limited to any equipment.
It is all about the superior concrete and precision of our 350-401 Simulated Test learning quiz that help. Every page and every points of knowledge have been written from professional experts who are proficient in this line who are being accounting for this line over ten years. Come and buy our 350-401 Simulated Test study guide, you will be benefited from it.
Cisco 350-401 Simulated Test - Well, you are in the right place.
Our product boosts varied functions to be convenient for you to master the 350-401 Simulated Test training materials and get a good preparation for the exam and they include the self-learning, the self-assessment, stimulating the exam and the timing function. We provide 24-hours online on 350-401 Simulated Test guide prep customer service and the long-distance professional personnel assistance to for the client. If clients have any problems about our 350-401 Simulated Test study materials they can contact our customer service anytime.
As is known to us, there are best sale and after-sale service of the 350-401 Simulated Test study materials all over the world in our company. Our company has employed a lot of excellent experts and professors in the field in the past years, in order to design the best and most suitable 350-401 Simulated Test study materials for all customers.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement about a fabric access point is true?
A. It is in local mode an must connected directly to the fabric edge switch.
B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
C. It is in FlexConnect mode and must be connected directly to the fabric border node.
D. It is in local mode an must be connected directly to the fabric border node.
Answer: A
Explanation:
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric
WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html
QUESTION NO: 2
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 3
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 4
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 5
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
As long as you buy our Huawei H28-155_V1.0 practice materials and take it seriously consideration, we can promise that you will pass your Huawei H28-155_V1.0 exam and get your certification in a short time. You will have easy access to all kinds of free trials of the HP HPE0-V28 practice materials. Since we release the first set of the Salesforce MuleSoft-Platform-Architect-I quiz guide, we have won good response from our customers and until now---a decade later, our products have become more mature and win more recognition. Salesforce CRT-101 - You can find their real comments in the comments sections. This may be a contradiction of the problem, we hope to be able to spend less time and energy to take into account the test Fortinet FCP_FCT_AD-7.2 certification, but the qualification examination of the learning process is very wasted energy, so how to achieve the balance? Our Fortinet FCP_FCT_AD-7.2 exam prep can be done with its high-efficient merit.
Updated: May 28, 2022