It is very necessary for candidates to get valid 350-401 Sheet File dumps collection because it can save your time and help you get succeed in IT filed by clearing 350-401 Sheet File actual test. Passing real exam is not easy task so many people need to take professional suggestions to prepare 350-401 Sheet File practice exam. The reason that we get good reputation among dump vendors is the most reliable 350-401 Sheet File pdf vce and the best-quality service. You just need to effectively review and pass 350-401 Sheet File exam successfully. The earlier you get 350-401 Sheet File exam certification, the more helpful for you to have better development in IT industry. Are you still silly to spend much time to prepare for your test but still fail again and again? Do you find that some candidates pass exam easily with Cisco 350-401 Sheet File exam dumps questions? If your goal is passing exams and obtain certifications our 350-401 Sheet File exam dumps can help you achieve your goal easily, why not choose us? Only dozen of money and 20-35 hours' valid preparation before the test with 350-401 Sheet File exam dumps questions will make you clear exam surely.
You can must success in the 350-401 Sheet File real test.
Omgzlook provides the most updated and accurate 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Sheet File study pdf for clearing your actual test. And our high pass rate as 98% to 100% are all proved data form our customers who had attended the Latest 350-401 Exam Pdf exam and got their success with the help of our Latest 350-401 Exam Pdf study dumps. So just come on and join our success!
The promotion is regular, so please hurry up to get the most cost-effective Cisco prep exam dumps. 350-401 Sheet File offers free demo for 350-401 Sheet File real test. You can check out the interface, question quality and usability of our 350-401 Sheet File practice exams before you decide to buy it.
Cisco 350-401 Sheet File - You can enjoy the nice service from us.
How to improve your IT ability and increase professional IT knowledge of 350-401 Sheet File real exam in a short time? Obtaining valid training materials will accelerate the way of passing 350-401 Sheet File actual test in your first attempt. It will just need to take one or two days to practice Cisco 350-401 Sheet File test questions and remember answers. You will free access to our test engine for review after payment.
In the course of your study, the test engine of 350-401 Sheet File actual exam will be convenient to strengthen the weaknesses in the learning process. This can be used as an alternative to the process of sorting out the wrong questions of 350-401 Sheet File learning guide in peacetime learning, which not only help you save time, but also makes you more focused in the follow-up learning process with our 350-401 Sheet File learning materials.
350-401 PDF DEMO:
QUESTION NO: 1
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 3
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
Fortinet FCSS_SASE_AD-24 - Just add it to your cart. As a key to the success of your life, the benefits that our Oracle 1z0-1122-24 study braindumps can bring you are not measured by money. The intelligence and customizable IBM C1000-189 training material will help you get the IBM C1000-189 certification successfully. We can assure you the proficiency of our SAP C_THR82_2405 exam prep. We not only provide you valid Salesforce ANC-201 exam answers for your well preparation, but also bring guaranteed success results to you.
Updated: May 28, 2022