If you still worry about your 350-401 Sample Questions exam; if you still doubt whether it is worthy of purchasing our software, what you can do to clarify your doubts is to download our 350-401 Sample Questions free demo. Once you have checked our demo, you will find the study materials we provide are what you want most. Our target is to reduce your pressure and improve your learning efficiency from preparing for 350-401 Sample Questions exam. Training materials of Omgzlook are currently the most popular materials on the internet. 350-401 Sample Questions Exam is a milestone in your career. If not, your usage of our dump this time will make you treat our Omgzlook as the necessary choice to prepare for other IT certification exams later.
CCNP Enterprise 350-401 PDF version is easy for read and print out.
Omgzlook is a reliable site offering the 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Sample Questions valid study material supported by 100% pass rate and full money back guarantee. Once you have well prepared with our 350-401 Valid Dumps Ppt dumps collection, you will go through the formal test without any difficulty. To help people pass exam easily, we bring you the latest 350-401 Valid Dumps Ppt exam prep for the actual test which enable you get high passing score easily in test.
Our website aimed to help you to get through your certification test easier with the help of our valid 350-401 Sample Questions vce braindumps. You just need to remember the answers when you practice 350-401 Sample Questions real questions because all materials are tested by our experts and professionals. Our 350-401 Sample Questions study guide will be your first choice of exam materials as you just need to spend one or days to grasp the knowledge points of 350-401 Sample Questions practice exam.
Cisco 350-401 Sample Questions - (PDF, APP, software).
Our 350-401 Sample Questions test guides have a higher standard of practice and are rich in content. If you are anxious about how to get 350-401 Sample Questions certification, considering purchasing our 350-401 Sample Questions study tool is a wise choice and you will not feel regretted. Our learning materials will successfully promote your acquisition of certification. Our 350-401 Sample Questions qualification test closely follow changes in the exam outline and practice. In order to provide effective help to customers, on the one hand, the problems of our 350-401 Sample Questions test guides are designed fitting to the latest and basic knowledge. For difficult knowledge, we will use examples and chart to help you learn better. On the other hand, our 350-401 Sample Questions test guides also focus on key knowledge and points that are difficult to understand to help customers better absorb knowledge. Only when you personally experience our 350-401 Sample Questions qualification test can you better feel the benefits of our products. Join us soon.
Up to now, there are three versions of 350-401 Sample Questions exam materials for your choice. So high-quality contents and flexible choices of 350-401 Sample Questions learning mode will bring about the excellent learning experience for you.
350-401 PDF DEMO:
QUESTION NO: 1
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 2
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 3
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
It is certain that the pass rate of our Microsoft DP-300-KR study guide among our customers is the most essential criteria to check out whether our Microsoft DP-300-KR training materials are effective or not. If you choose our nearly perfect SAP C_TS462_2022-KRpractice materials with high quality and accuracy, our SAP C_TS462_2022-KR training questions can enhance the prospects of victory. Before you buy our product, you can download and try out it freely so you can have a good understanding of our CompTIA PT0-002 quiz prep. All contents of Network Appliance NS0-404 training prep are made by elites in this area rather than being fudged by laymen. Within one year, we will send the latest version to your mailbox with no charge if we have a new version of EMC D-SNC-DY-00 learning materials.
Updated: May 28, 2022