Would you like to register Cisco 350-401 Sample Online certification test? Would you like to obtain 350-401 Sample Online certificate? Without having enough time to prepare for the exam, what should you do to pass your exam? In fact, there are techniques that can help. Even if you have a very difficult time preparing for the exam, you also can pass your exam successfully. How do you do that? The method is very simple, that is to use Omgzlook Cisco 350-401 Sample Online dumps to prepare for your exam. In today's era, knowledge is becoming more and more important, and talents are becoming increasingly saturated. In such a tough situation, how can we highlight our advantages? It may be a good way to get the test 350-401 Sample Online certification. We believe you will like our dumps that have helped more candidates pass 350-401 Sample Online exam after you have tried it.
CCNP Enterprise 350-401 You can really try it we will never let you down!
As we all know the passing rate for IT exams is low, the wise choice for candidates will select valid 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Sample Online test braindump materials to make you pass exam surely and fast. Then you can start learning our New 350-401 Test Testking exam questions in preparation for the exam. After years of hard work, our New 350-401 Test Testking guide training can take the leading position in the market.
The intelligence of the 350-401 Sample Online test engine has inspired the enthusiastic for the study. In order to save your time and energy, you can install 350-401 Sample Online test engine on your phone or i-pad, so that you can study in your spare time. You will get a good score with high efficiency with the help of 350-401 Sample Online practice training tools.
Cisco 350-401 Sample Online - Only firm people will reach the other side.
Victory won't come to me unless I go to it. It is time to start to clear exam and obtain an IT certification to improve your competitor from our Cisco 350-401 Sample Online training PDF if you don't want to be discarded by epoch. Many IT workers have a nice improve after they get a useful certification. If you are willing, our 350-401 Sample Online training PDF can give you a good beginning. No need to doubt and worry, thousands of candidates choose our exam training materials, you shouldn't miss this high pass-rate 350-401 Sample Online training PDF materials.
Our effort in building the content of our 350-401 Sample Online learning questions lead to the development of learning guide and strengthen their perfection. Our 350-401 Sample Online practice braindumps beckon exam candidates around the world with our attractive characters.
350-401 PDF DEMO:
QUESTION NO: 1
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 2
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
We assist you to prepare the key knowledge points of Huawei H13-629_V3.0 actual test and obtain the up-to-dated exam answers. The high quality product like our Salesforce Marketing-Cloud-Account-Engagement-Specialist study quiz has no need to advertise everywhere, and exerts influential effects which are obvious and everlasting during your preparation. We will offer you the privilege of 365 days free update for Cisco 200-301 latest exam dumps. You will find the exam is a piece of cake with the help of our ISTQB CTAL-TTA study materials. Huawei H23-221_V1.0 questions & answers cover all the key points of the real test.
Updated: May 28, 2022