We believe that our 350-401 Reliable Questions learning engine will meet your all needs. Please give us a chance to service you; you will be satisfied with our training prep. Our 350-401 Reliable Questions preparation exam will be very useful for you if you are going to take the exam. You will gradually be aware of the great importance of stimulating the actual exam after learning about our 350-401 Reliable Questions study tool. Because of this function, you can easily grasp how the practice system operates and be able to get hold of the core knowledge about the Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) exam. If you are a college student, you can learn and use online resources through the student learning platform over the 350-401 Reliable Questions study materials.
CCNP Enterprise 350-401 Finding a good paying job is available for you.
Our PDF version of 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Reliable Questions training materials is legible to read and remember, and support printing request. In a sense, our 350-401 Valid Study Guide real exam dumps equal a mobile learning device. We are not just thinking about making money.
Get the test 350-401 Reliable Questions certification is not achieved overnight, we need to invest a lot of time and energy to review, and the review process is less a week or two, more than a month or two, or even half a year, so 350-401 Reliable Questions exam questions are one of the biggest advantage is that it is the most effective tools for saving time for users. Users do not need to spend too much time on 350-401 Reliable Questions questions torrent, only need to use their time pieces for efficient learning, the cost is about 20 to 30 hours, users can easily master the test key and difficulties of questions and answers of 350-401 Reliable Questions prep guide, and in such a short time acquisition of accurate examination skills, better answer out of step, so as to realize high pass the qualification test, has obtained the corresponding qualification certificate.
Cisco 350-401 Reliable Questions - It is easy to carry.
Our company has authoritative experts and experienced team in related industry. To give the customer the best service, all of our company's 350-401 Reliable Questions learning materials are designed by experienced experts from various field, so our 350-401 Reliable Questions Learning materials will help to better absorb the test sites. One of the great advantages of buying our product is that can help you master the core knowledge in the shortest time. At the same time, our 350-401 Reliable Questions learning materials discard the most traditional rote memorization methods and impart the key points of the qualifying exam in a way that best suits the user's learning interests, this is the highest level of experience that our most authoritative think tank brings to our 350-401 Reliable Questions learning materials users. Believe that there is such a powerful expert help, our users will be able to successfully pass the qualification test to obtain the qualification certificate.
Users using our 350-401 Reliable Questions study materials must be the first group of people who come into contact with new resources. When you receive an update reminder from 350-401 Reliable Questions practice questions, you can update the version in time and you will never miss a key message.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
In compliance with syllabus of the exam, our HP HPE7-A04 practice materials are determinant factors giving you assurance of smooth exam. The APP version of SAP C_ARSCC_2404 study materials can save you traffic. Normally, we will release our new version of the Salesforce Salesforce-AI-Specialist exam simulation on our website once it passed the tests. We try to offer the best Dell D-PWF-RDY-A-00 exam braindumps to our customers. Oracle 1z0-1072-24 - Omgzlook is a convenient website specifically for people who want to take the certification exams, which can effectively help the candidates to pass the exam.
Updated: May 28, 2022