With three versions of products, our 350-401 Questions Vce learning questions can satisfy different taste and preference of customers with different use: PDF & Software & APP versions. Without ambiguous points of questions make you confused, our 350-401 Questions Vce practice materials can convey the essence of the content suitable for your exam. With our 350-401 Questions Vce exam guide, you will achieve what you are expecting with ease. You can take the 350-401 Questions Vce training materials and pass it without any difficulty. Now is not the time to be afraid to take any more difficult 350-401 Questions Vce certification exams. Our product is affordable and good, if you choose our products, we can promise that our 350-401 Questions Vce exam torrent will not let you down.
CCNP Enterprise 350-401 What is more, we offer customer services 24/7.
If you want to be one of them, please allow me to recommend the 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Questions Vce learning questions from our company to you, the superb quality of 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Questions Vce exam braindumps we've developed for has successfully helped thousands of candidates to realize their dreams. Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) study questions provide free trial service for consumers. If you are interested in Latest 350-401 Test Fee exam material, you only need to enter our official website, and you can immediately download and experience our trial PDF file for free.
The only aim of our company is to help each customer pass their exam as well as getting the important certification in a short time. If you want to pass your exam and get the 350-401 Questions Vce certification which is crucial for you successfully, I highly recommend that you should choose the 350-401 Questions Vce study materials from our company so that you can get a good understanding of the exam that you are going to prepare for. We believe that if you decide to buy the 350-401 Questions Vce study materials from our company, you will pass your exam and get the certification in a more relaxed way than other people.
Cisco 350-401 Questions Vce - Selecting Omgzlook means choosing a success
350-401 Questions Vce exam dumps allow free trial downloads. You can get the information you want to know through the trial version. After downloading our study materials trial version, you can also easily select the version you like, as well as your favorite 350-401 Questions Vce exam prep, based on which you can make targeted choices. Our study materials want every user to understand the product and be able to really get what they need.
You can free download part of Omgzlook's practice questions and answers about Cisco certification 350-401 Questions Vce exam online, as an attempt to test our quality. As long as you choose to purchase Omgzlook's products, we will do our best to help you pass Cisco certification 350-401 Questions Vce exam disposably.
350-401 PDF DEMO:
QUESTION NO: 1
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 2
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 5
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
If you also want to get this certificate to increase your job opportunities, please take a few minutes to see our SAP P-SAPEA-2023 training materials. Omgzlook's training product for Cisco certification EXIN SIAMP exam includes simulation test and the current examination. With the help of our Huawei H19-308_V4.0 practice guide, you don't have to search all kinds of data, because our products are enough to meet your needs. If you think you can face unique challenges in your career, you should pass the Cisco EMC D-ECS-DY-23 exam. Qlik QSDA2024 - Nowadays, online shopping has been greatly developed, but because of the fear of some uncontrollable problems after payment, there are still many people don't trust to buy things online, especially electronic products.
Updated: May 28, 2022