The test software used in our products is a perfect match for Windows' 350-401 Questions Book learning material, which enables you to enjoy the best learning style on your computer. Our 350-401 Questions Book certification guide also use the latest science and technology to meet the new requirements of authoritative research material network learning. Unlike the traditional way of learning, the great benefit of our 350-401 Questions Book learning material is that when the user finishes the exercise, he can get feedback in the fastest time. We know that encouragement alone cannot really improve your confidence in exam, so we provide the most practical and effective test software to help you pass the 350-401 Questions Book exam. You can use our samples first to experience the effect of our software, and we believe that you can realize our profession and efforts by researching and developing 350-401 Questions Book exam software from samples of 350-401 Questions Book. 350-401 Questions Book exam questions are tested by many users and you can rest assured.
CCNP Enterprise 350-401 You must use it before the deadline day.
Our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Questions Book exam braindumps are famous for its advantage of high efficiency and good quality which are carefully complied by the professionals. You are going to find the online version of our New 350-401 Test Cost exam prep applies to all electronic equipment, including telephone, computer and so on. On the other hand, if you decide to use the online version of our New 350-401 Test Cost study materials, you don’t need to worry about no network.
It is all about the superior concrete and precision of our 350-401 Questions Book learning quiz that help. Every page and every points of knowledge have been written from professional experts who are proficient in this line who are being accounting for this line over ten years. Come and buy our 350-401 Questions Book study guide, you will be benefited from it.
Cisco 350-401 Questions Book - Well, you are in the right place.
Our product boosts varied functions to be convenient for you to master the 350-401 Questions Book training materials and get a good preparation for the exam and they include the self-learning, the self-assessment, stimulating the exam and the timing function. We provide 24-hours online on 350-401 Questions Book guide prep customer service and the long-distance professional personnel assistance to for the client. If clients have any problems about our 350-401 Questions Book study materials they can contact our customer service anytime.
As is known to us, there are best sale and after-sale service of the 350-401 Questions Book study materials all over the world in our company. Our company has employed a lot of excellent experts and professors in the field in the past years, in order to design the best and most suitable 350-401 Questions Book study materials for all customers.
350-401 PDF DEMO:
QUESTION NO: 1
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 2
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 3
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 4
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 5
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
So choose our exam braindumps to help you review, you will benefit a lot from our Huawei H19-338_V3.0 study guide. You will have easy access to all kinds of free trials of the Microsoft MS-900 practice materials. Since we release the first set of the SAP C-ARP2P-2404 quiz guide, we have won good response from our customers and until now---a decade later, our products have become more mature and win more recognition. ISACA COBIT-Design-and-Implementation - And we will try our best to satisfy our customers with better quatily and services. How to get the test CheckPoint 156-521 certification in a short time, which determines enough qualification certificates to test our learning ability and application level.
Updated: May 28, 2022