For more textual content about practicing exam questions, you can download our products with reasonable prices and get your practice begin within 5 minutes. After getting to know our 350-401 Questions Answers test guide by free demos, many exam candidates had their volitional purchase. So our 350-401 Questions Answers latest dumps are highly effective to make use of. You can directly select our products. Firstly, we have free trials of the 350-401 Questions Answers exam study materials to help you know our products. And you can free donwload the demos to have a look.
CCNP Enterprise 350-401 Success is has method.
What made our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Questions Answers study guide so amazing? The answer that we only supply the latest and valid 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Questions Answers exam braindumps for our customers and first-class after-sales services come after the first-class 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Questions Answers learning engine. Omgzlook of Cisco Valid Exam 350-401 Sample Questions exam materials is the source of your success. With this training materials, you will speed up the pace of success, and you will be more confident.
We regard the customer as king so we put a high emphasis on the trust of every users, therefore our security system can protect you both in payment of 350-401 Questions Answers guide braindumps and promise that your computer will not be infected during the process of payment on our 350-401 Questions Answers study materials. Moreover, if you end up the cooperation between us,we have the responsibility to delete your personal information on 350-401 Questions Answers exam prep. In a word, Wwe have data protection act for you to avoid information leakage!
Omgzlook Cisco 350-401 Questions Answers braindump has a high hit rate.
Once you learn all 350-401 Questions Answers questions and answers in the study guide, try Omgzlook's innovative testing engine for exam like 350-401 Questions Answers practice tests. These tests are made on the pattern of the 350-401 Questions Answers real exam and thus remain helpful not only for the purpose of revision but also to know the real exam scenario. To ensure excellent score in the exam, 350-401 Questions Answers braindumps are the real feast for all exam candidates. They contain questions and answers on all the core points of your exam syllabus. Most of these questions are likely to appear in the 350-401 Questions Answers real exam.
Wanting to upgrade yourself, are there plans to take Cisco 350-401 Questions Answers exam? If you want to attend 350-401 Questions Answers exam, what should you do to prepare for the exam? Maybe you have found the reference materials that suit you. And then are what materials your worthwhile option? Do you have chosen Omgzlook Cisco 350-401 Questions Answers real questions and answers? If so, you don't need to worry about the problem that can't pass the exam.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
EMC D-NWR-DY-01 - We think of providing the best services as our obligation. We will try our best to help you pass VMware 2V0-31.24 exam successfully. It is quite convenient to study with our SAP C-SAC-2402 study materials. We ensure that the SAP C_TS422_2023 exam software you are using is the latest version. Get our Fortinet NSE5_FMG-7.2 certification actual exam and just make sure that you fully understand it and study every single question in it by heart.
Updated: May 28, 2022