We have made all efforts to update our product in order to help you deal with any change, making you confidently take part in the exam. We will inform you that the 350-401 Practice Questions study materials should be updated and send you the latest version in a year after your payment. We will also provide some discount for your updating after a year if you are satisfied with our 350-401 Practice Questions exam prepare. We believe that the 350-401 Practice Questions exam questions from our company will help all customers save a lot of installation troubles. You just need to have a browser on your device you can use our study materials. And our 350-401 Practice Questions study materials always contain the latest exam Q&A.
CCNP Enterprise 350-401 After ten days you can go to the exam.
We make 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Practice Questions exam prep from exam candidate perspective, and offer high quality practice materials with reasonable prices but various benefits. On one hand, our Flexible 350-401 Testing Engine study materials are all the latest and valid exam questions and answers that will bring you the pass guarantee. on the other side, we offer this after-sales service to all our customers to ensure that they have plenty of opportunities to successfully pass their actual exam and finally get their desired certification of Flexible 350-401 Testing Engine learning materials.
Once you decide to buy, you will have many benefits like free update lasting one-year and convenient payment mode. We will inform you immediately once there are latest versions of 350-401 Practice Questions test question released. And if you get any questions, please get contact with us, our staff will be online 24/7 to solve your problems all the way.
Cisco 350-401 Practice Questions - I wish you good luck.
Omgzlook website is fully equipped with resources and the questions of Cisco 350-401 Practice Questions exam, it also includes the Cisco 350-401 Practice Questions exam practice test. Which can help candidates prepare for the exam and pass the exam. You can download the part of the trial exam questions and answers as a try. Omgzlook provide true and comprehensive exam questions and answers. With our exclusive online Cisco 350-401 Practice Questions exam training materials, you'll easily through Cisco 350-401 Practice Questions exam. Our site ensure 100% pass rate.
If you use Omgzlook'straining program, you can 100% pass the exam. If you fail the exam, we will give a full refund to you.
350-401 PDF DEMO:
QUESTION NO: 1
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 3
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
The exam materiala of the Omgzlook Cisco Microsoft DP-300 is specifically designed for candicates. Microsoft AI-900 - The Omgzlook exists precisely to your success. Omgzlook's Cisco SAP C_THR85_2405 exam training materials is a proven software. Dear candidates, have you thought to participate in any Cisco SAP C-THR85-2405 exam training courses? In fact, you can take steps to pass the certification. SAP C-TS414-2023 - Come on, you will be the next best IT experts.
Updated: May 28, 2022