This may be the best chance to climb the top of your life. Our 350-401 Pdf Format prepare questions are suitable for people of any culture level, whether you are the most basic position, or candidates who have taken many exams, is a great opportunity for everyone to fight back. According to different audience groups, our products for the examination of the teaching content of a careful division, so that every user can find a suitable degree of learning materials. Someone around you must be using our 350-401 Pdf Format exam questions. The users of our 350-401 Pdf Format exam materials are really very extensive. First of all, our 350-401 Pdf Format study materials are very rich, so you are free to choose.
CCNP Enterprise 350-401 But even the best people fail sometimes.
And our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Pdf Format study braindumps deliver the value of our services. You really need our Dumps 350-401 Free Download practice materials which can work as the pass guarantee. Nowadays, the certification has been one of the criteria for many companies to recruit employees.
Instead of focusing on profits, we determined to help every customer harvest desirable outcomes by our 350-401 Pdf Format training materials. So our staff and after-sales sections are regularly interacting with customers for their further requirements and to know satisfaction levels of them. We want to finish long term objectives through customer satisfaction and we have achieved it already by our excellent 350-401 Pdf Format exam questions.
Cisco 350-401 Pdf Format - Just have a try and you will love them!
After the user has purchased our 350-401 Pdf Format learning materials, we will discover in the course of use that our product design is extremely scientific and reasonable. Details determine success or failure, so our every detail is strictly controlled. For example, our learning material's Windows Software page is clearly, our 350-401 Pdf Format Learning material interface is simple and beautiful. There are no additional ads to disturb the user to use the 350-401 Pdf Format learning material. Once you have submitted your practice time, 350-401 Pdf Format learning Material system will automatically complete your operation.
If you believe in our products this time, you will enjoy the happiness of success all your life Our 350-401 Pdf Format learning quiz is the accumulation of professional knowledge worthy practicing and remembering, so you will not regret choosing our 350-401 Pdf Format study guide.
350-401 PDF DEMO:
QUESTION NO: 1
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 2
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
HP HPE0-S60 - So we have tried our best to develop the three packages for you to choose. We have issued numerous products, so you might feel confused about which SAP E-S4CPE-2023 study dumps suit you best. SAP C_IEE2E_2404 - The strength of our the IT elite team will make you feel incredible. Our Adobe AD0-E121 learning guide allows you to study anytime, anywhere. Senior IT experts in the Omgzlook constantly developed a variety of successful programs of passing Cisco certification SAP C-IEE2E-2404 exam, so the results of their research can 100% guarantee you Cisco certification SAP C-IEE2E-2404 exam for one time.
Updated: May 28, 2022