We can proudly claim that you can successfully pass the exam just on the condition that you study with our 350-401 Pass Rate preparation materials for 20 to 30 hours. And not only you will get the most rewards but also you will get an amazing study experience by our 350-401 Pass Rate exam questions. For we have three different versions of our 350-401 Pass Rate study guide, and you will have different feelings if you have a try on them. If you have a IT dream， then quickly click the click of Omgzlook. It has the best training materials, which is Omgzlook;s Cisco 350-401 Pass Rate exam training materials. If you do not own one or two kinds of skills, it is difficult for you to make ends meet in the modern society.
CCNP Enterprise 350-401 So, hurry to take action.
CCNP Enterprise 350-401 Pass Rate - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) If you still have suspicions, please directly write your questions and contact our online workers. From the time when you decide whether to purchase our 350-401 Valid Study Questions Files exam software or not, we have provided you with comprehensive guarantees, including free demo download before buying, payment guarantee in purchase process, one-year free update service after you purchased 350-401 Valid Study Questions Files exam software, and full refund guarantee of dump cost if you fail 350-401 Valid Study Questions Files exam certification, which are all our promises to ensure customer interests. Many times getting a right method is important and more efficient than spending too much time and money in vain.
Now let's take a look at why a worthy product of your choice is our 350-401 Pass Rate actual exam. Firstly, with a high pass rate of 98% to 100%, you will get the pass guarantee form our 350-401 Pass Rate practice engine. Secondly, the price of our 350-401 Pass Rate learning guide is quite favourable than the other websites'.
Cisco 350-401 Pass Rate - When choosing a product, you will be entangled.
When people take the subway staring blankly, you can use Pad or cell phone to see the PDF version of the 350-401 Pass Rate study materials. While others are playing games online, you can do online 350-401 Pass Rate exam questions. We are sure that as you hard as you are, you can pass 350-401 Pass Rate exam easily in a very short time. While others are surprised at your achievement, you might have found a better job.
However, we believe that with the excellent quality and good reputation of our study materials, we will be able to let users select us in many products. Our study materials allow users to use the 350-401 Pass Rate certification guide for free to help users better understand our products better.
350-401 PDF DEMO:
QUESTION NO: 1
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 2
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 3
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
In addition, it is very easy and convenient to make notes during the study for SAP C_S4CPR_2402 real test, which can facilitate your reviewing. SAP C_S43_2022 - After we develop a new version, we will promptly notify you. If you are not sure about your exam, choosing our SAP C-TS4CO-2023 exam cram file will be a good choice for candidates. Microsoft MB-700 - You can choose one or more versions that you are most interested in, and then use your own judgment. ISACA IT-Risk-Fundamentals - Stop hesitating.
Updated: May 28, 2022