We choose the most useful and typical questions and answers which contain the key points of the test and we try our best to use the least amount of questions and answers to showcase the most significant information. Our 350-401 Level Test learning guide provides a variety of functions to help the clients improve their learning. For example, the function to stimulate the exam helps the clients test their learning results of the 350-401 Level Test learning dump in an environment which is highly similar to the real exam. Now Cisco 350-401 Level Test certification test is very popular. Not having got 350-401 Level Test certificate, you must want to take the exam. No matter in the day or on the night, you can consult us the relevant information about our 350-401 Level Test preparation exam through the way of chatting online or sending emails.
CCNP Enterprise 350-401 This certification gives us more opportunities.
With the advantage of simulating the real exam environment, you can get a wonderful study experience with our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Level Test exam prep as well as gain the best pass percentage. In the process of job hunting, we are always asked what are the achievements and what certificates have we obtained? Therefore, we get the test Cisco certification and obtain the qualification certificate to become a quantitative standard, and our 350-401 Valid Dumps Sheet learning guide can help you to prove yourself the fastest in a very short period of time. Life is short for each of us, and time is precious to us.
Our online resources and events enable you to focus on learning just what you want on your timeframe. You get access to every 350-401 Level Test exams files and there continuously update our 350-401 Level Test study materials; these exam updates are supplied free of charge to our valued customers. Get the best 350-401 Level Test exam Training; as you study from our exam-files.
Cisco 350-401 Level Test - If you make up your mind, choose us!
When you purchase 350-401 Level Test exam dumps from Omgzlook, you never fail 350-401 Level Test exam ever again. We bring you the best 350-401 Level Test exam preparation dumps which are already tested rigorously for their authenticity. Start downloading your desired 350-401 Level Test exam product without any second thoughts. Our 350-401 Level Test products will make you pass in first attempt with highest scores. We accept the challenge to make you pass 350-401 Level Test exam without seeing failure ever!
The staff of 350-401 Level Test study guide is professionally trained. They can solve any problems you encounter on the 350-401 Level Test exam questions.
350-401 PDF DEMO:
QUESTION NO: 1
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 2
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
OCEG GRCA - Omgzlook trusts in displacing all the qualms before believing us. Secondly, a wide range of practice types and different version of our Adobe AD0-E716 exam training questions receive technological support through our expert team. Here we would like to introduce our ATLASSIAN ACP-120 practice materials for you with our heartfelt sincerity. VMware 3V0-21.23 - Do you want to choose a lifetime of mediocrity or become better and pursue your dreams? I believe you will have your own pursuit. You can browse through our EMC D-PVM-DS-23 certification test preparation materials that introduce real exam scenarios to build your confidence further.
Updated: May 28, 2022