So for us, with one more certification, we will have one more bargaining chip in the future. However, it is difficult for many people to get a 350-401 Learning Materials certification, but we are here to offer you help. We have helped tens of thousands of our customers achieve their certification with our excellent 350-401 Learning Materials exam braindumps. Now, I am glad to introduce a secret weapon for all of the candidates to pass the exam as well as get the related certification without any more ado-- our 350-401 Learning Materials study braindumps. You can only get the most useful and efficient 350-401 Learning Materials guide materials with the most affordable price from our company, since we aim to help as many people as possible rather than earning as much money as possible. Maybe you still have doubts about our 350-401 Learning Materials exam braindumps.
CCNP Enterprise 350-401 It's never too late to know it from now on.
CCNP Enterprise 350-401 Learning Materials - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) So our exam training materials is simulated with the practical exam. And this version also helps establish the confidence of the candidates when they attend the Valid 350-401 Test Simulator Free exam after practicing. Because of the different habits and personal devices, requirements for the version of our Valid 350-401 Test Simulator Free exam questions vary from person to person.
If you want to attend the exam, Omgzlook Cisco 350-401 Learning Materials questions and answers can offer you convenience. The dumps are indispensable and the best. In recent years, many people are interested in Cisco certification exam.
Cisco 350-401 Learning Materials - Don't worry over trifles.
In order to meet the demand of all customers and protect your machines network security, our company can promise that our 350-401 Learning Materials test training guide have adopted technological and other necessary measures to ensure the security of personal information they collect, and prevent information leaks, damage or loss. In addition, the 350-401 Learning Materials exam dumps system from our company can help all customers ward off network intrusion and attacks prevent information leakage, protect user machines network security. If you choose our 350-401 Learning Materials study questions as your study tool, we can promise that we will try our best to enhance the safety guarantees and keep your information from revealing, and your privacy will be protected well. You can rest assured to buy the 350-401 Learning Materials exam dumps from our company.
The mission of Omgzlook is to make the valid and high quality Cisco test pdf to help you advance your skills and knowledge and get the 350-401 Learning Materials exam certification successfully. When you visit our product page, you will find the detail information about 350-401 Learning Materials practice test.
350-401 PDF DEMO:
QUESTION NO: 1
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 2
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 3
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 4
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
For example, it will note that how much time you have used to finish the Salesforce Advanced-Administrator study guide, and how much marks you got for your practice as well as what kind of the questions and answers you are wrong with. SAP C_TS4CO_2023 - A bold attempt is half success. We can make sure that all employees in our company have wide experience and advanced technologies in designing the Microsoft AZ-400 study dump. Using ACFCS CFCS real questions will not only help you clear exam with less time and money but also bring you a bright future. If you use a trial version of SAP C_CPI_2404 training prep, you can find that our study materials have such a high passing rate and so many users support it.
Updated: May 28, 2022