Actually we eliminate the barriers blocking you from our 350-401 Instant Download practice materials. All types of our 350-401 Instant Download exam questions are priced favorably on your wishes. Obtaining our 350-401 Instant Download study guide in the palm of your hand, you can achieve a higher rate of success. You have tried all kinds of exam questions when others are still looking around for 350-401 Instant Download exam materials, which means you have stayed one step ahead of other IT exam candidates. 350-401 Instant Download exam software provided by our Omgzlook consists of full exam resources will offer you a simulation of the real exam atmosphere of 350-401 Instant Download. If you have made up your mind to get respect and power, the first step you need to do is to get the 350-401 Instant Download certification, because the certification is a reflection of your ability.
CCNP Enterprise 350-401 If you fail, don't forget to learn your lesson.
CCNP Enterprise 350-401 Instant Download - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) They have the same questions and answers but with different using methods. Don't hesitate to get help from our customer assisting. Downloading the Exam 350-401 Tutorial free demo doesn't cost you anything and you will learn about the pattern of our practice exam and the accuracy of our Exam 350-401 Tutorial test answers.
We often ask, what is the purpose of learning? Why should we study? Why did you study for 350-401 Instant Downloadexam so long? As many people think that, even if one day we forget the formula for the area of a triangle, we can still live very well, but if it were not for the knowledge of learning 350-401 Instant Download exam and try to obtain certification, how can we have the opportunity to good to future life? So, the examination is necessary, only to get the test 350-401 Instant Download certification, get a certificate, to prove better us, to pave the way for our future life.
Cisco 350-401 Instant Download - Just come and buy it!
The dynamic society prods us to make better. Our services on our 350-401 Instant Download exam questions are also dependable in after-sales part with employees full of favor and genial attitude towards job. So our services around the 350-401 Instant Download training materials are perfect considering the needs of exam candidates all-out. They bravely undertake the duties. Our staff knows our 350-401 Instant Download study quiz play the role of panacea in the exam market which aim to bring desirable outcomes to you.
The series of 350-401 Instant Download measures we have taken is also to allow you to have the most professional products and the most professional services. I believe that in addition to our 350-401 Instant Download exam questions, you have also used a variety of products.
350-401 PDF DEMO:
QUESTION NO: 1
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 2
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 3
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
We can guarantee that we will keep the most appropriate price because we want to expand our reputation of Cisco 700-250 preparation dumps in this line and create a global brand. Our {Cisco 300-510 certification material get to the exam questions can help users in the first place, and what they care about the test information, can put more time in learning a new hot spot content. CheckPoint 156-315.81 - Service is first! MuleSoft MCIA-Level-1 - This kind of learning method is very convenient for the user, especially in the time of our fast pace to get Cisco certification. The experts in our company have been focusing on the APM APM-PFQ examination for a long time and they never overlook any new knowledge.
Updated: May 28, 2022