I can guarantee that you will have no regrets about using our 350-401 Hottest Certification test braindumps When the time for action arrives, stop thinking and go in, try our 350-401 Hottest Certification exam torrent, you will find our products will be a very good choice for you to pass your exam and get you certificate in a short time. If you are finding a study material to prepare your exam, our material will end your search. Our {350-401 Hottest Certification exam torrent has a high quality that you can’t expect. Our 350-401 Hottest Certification study materials are willing to stand by your side and provide attentive service, and to meet the majority of customers, we sincerely recommend our 350-401 Hottest Certification practice guide to all customers, for our rich experience and excellent service are more than you can imagine. Here are several advantages of 350-401 Hottest Certification training guide for your reference: we have free demos for you to download before payment, and we offer one year free updates of our 350-401 Hottest Certification exam questions after payment and so on. It is your right time to make your mark.
CCNP Enterprise 350-401 They will mitigate your chance of losing.
Dear customers, you may think it is out of your league before such as winning the 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Hottest Certification exam practice is possible within a week or a 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Hottest Certification practice material could have passing rate over 98 percent. You can send us an email to ask questions at anytime, anywhere. For any questions you may have during the use of Reliable 350-401 Test Papers exam questions, our customer service staff will be patient to help you to solve them.
With our 350-401 Hottest Certification study materials, all your agreeable outcomes are no longer dreams for you. And with the aid of our 350-401 Hottest Certification exam preparation to improve your grade and change your states of life and get amazing changes in career, everything is possible. It all starts from our 350-401 Hottest Certification learning questions.
Cisco 350-401 Hottest Certification - As the saying goes, Rome is not build in a day.
In order to facilitate the wide variety of users' needs the 350-401 Hottest Certification study guide have developed three models with the highest application rate in the present - PDF, software and online. No matter you are a student, a office staff or even a housewife, you can always find your most situable way to study our 350-401 Hottest Certification exam Q&A. Generally speaking, these three versions of our 350-401 Hottest Certification learning guide can support study on paper, computer and all kinds of eletronic devices. They are quite convenient.
The 350-401 Hottest Certification latest dumps will be a shortcut for a lot of people who desire to be the social elite. If you try your best to prepare for the 350-401 Hottest Certification exam and get the related certification in a short time, it will be easier for you to receive the attention from many leaders of the big company, and it also will be very easy for many people to get a decent job in the labor market by the 350-401 Hottest Certification learning guide.
350-401 PDF DEMO:
QUESTION NO: 1
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 2
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 3
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
Our EMC D-CI-DS-23 learning materials provide you with a platform of knowledge to help you achieve your wishes. According to the survey of our company, we have known that a lot of people hope to try the Microsoft PL-400-KR test training materials from our company before they buy the study materials, because if they do not have a try about our study materials, they cannot sure whether the study materials from our company is suitable for them to prepare for the exam or not. In 21st century, every country had entered the period of talent competition, therefore, we must begin to extend our Microsoft DP-300-KR personal skills, only by this can we become the pioneer among our competitors. All the experts in our company are devoting all of their time to design the best CompTIA FC0-U61test question for all people. What is more, our Fortinet NSE7_LED-7.0 practice engine persists in creating a modern service oriented system and strive for providing more preferential activities for your convenience.
Updated: May 28, 2022