They all have high authority in the IT area. They use professional knowledge and experience to provide training materials for people ready to participate in different IT certification exams. The accuracy rate of exam practice questions and answers provided by Omgzlook is very high and they can 100% guarantee you pass the exam successfully for one time. If you obtain Cisco certificate, you will get a great help. Because Cisco 350-401 Examcollection Dumps certification test is a very important exam, you can begin with passing 350-401 Examcollection Dumps test. Cisco certification 350-401 Examcollection Dumps exam is an exam concerned by lots of IT professionals.
Omgzlook 350-401 Examcollection Dumps braindump has a high hit rate.
These tests are made on the pattern of the 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Examcollection Dumps real exam and thus remain helpful not only for the purpose of revision but also to know the real exam scenario. Wanting to upgrade yourself, are there plans to take Cisco Latest 350-401 Dumps Free exam? If you want to attend Latest 350-401 Dumps Free exam, what should you do to prepare for the exam? Maybe you have found the reference materials that suit you. And then are what materials your worthwhile option? Do you have chosen Omgzlook Cisco Latest 350-401 Dumps Free real questions and answers? If so, you don't need to worry about the problem that can't pass the exam.
Besides, to fail while trying hard is no dishonor. We will provide the free update of our 350-401 Examcollection Dumps study engine until you pass your exam successfully! We think of providing the best services as our obligation.
Cisco 350-401 Examcollection Dumps - You can copy to your mobile, Ipad or others.
Different from other similar education platforms, the 350-401 Examcollection Dumps quiz guide will allocate materials for multi-plate distribution, rather than random accumulation without classification. How users improve their learning efficiency is greatly influenced by the scientific and rational design and layout of the learning platform. The Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) prepare torrent is absorbed in the advantages of the traditional learning platform and realize their shortcomings, so as to develop the 350-401 Examcollection Dumps test material more suitable for users of various cultural levels. If just only one or two plates, the user will inevitably be tired in the process of learning on the memory and visual fatigue, and the 350-401 Examcollection Dumps test material provided many study parts of the plates is good enough to arouse the enthusiasm of the user, allow the user to keep attention of highly concentrated.
Our 350-401 Examcollection Dumps dumps torrent contains everything you want to solve the challenge of real exam. Our 350-401 Examcollection Dumps free dumps demo will provide you some basic information for the accuracy of our exam materials.
350-401 PDF DEMO:
QUESTION NO: 1
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 2
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 3
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
What we attach importance to in the transaction of latest SASInstitute A00-215 quiz prep is for your consideration about high quality and efficient products and time-saving service. Our website offers you the latest preparation materials for the IBM C1000-181 real exam and the study guide for your review. To add up your interests and simplify some difficult points, our experts try their best to simplify our VMware 6V0-32.24 study material and help you understand the learning guide better. Accordingly there are huge changes on the study models of our Fortinet NSE7_SDW-7.2 exam dumps as well. What's more, the latest version of our Oracle 1z1-071 study materials will be a good way for you to broaden your horizons as well as improve your skills.
Updated: May 28, 2022