If you do not own one or two kinds of skills, it is difficult for you to make ends meet in the modern society. After all, you can rely on no one but yourself. At present, our 350-401 Exam Vcestudy materials can give you a ray of hope. So you can personally check the quality of the Omgzlook Cisco 350-401 Exam Vce exam training materials, and then decide to buy it. If you did not pass the exam unfortunately, we will refund the full cost of your purchase. Please accept our 350-401 Exam Vce learning prep and generate a golden bowl for yourself.
CCNP Enterprise 350-401 It is absolutely trustworthy website.
CCNP Enterprise 350-401 Exam Vce - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) If you still have suspicions, please directly write your questions and contact our online workers. From the time when you decide whether to purchase our Free Sample 350-401 Questions exam software or not, we have provided you with comprehensive guarantees, including free demo download before buying, payment guarantee in purchase process, one-year free update service after you purchased Free Sample 350-401 Questions exam software, and full refund guarantee of dump cost if you fail Free Sample 350-401 Questions exam certification, which are all our promises to ensure customer interests. Many times getting a right method is important and more efficient than spending too much time and money in vain.
Secondly, the price of our 350-401 Exam Vce learning guide is quite favourable than the other websites'. 350-401 Exam Vce study guide can bring you more than you wanted. After you have used our products, you will certainly have your own experience.
Cisco 350-401 Exam Vce - When choosing a product, you will be entangled.
When people take the subway staring blankly, you can use Pad or cell phone to see the PDF version of the 350-401 Exam Vce study materials. While others are playing games online, you can do online 350-401 Exam Vce exam questions. We are sure that as you hard as you are, you can pass 350-401 Exam Vce exam easily in a very short time. While others are surprised at your achievement, you might have found a better job.
Even if you find that part of it is not for you, you can still choose other types of learning materials in our study materials. We can meet all your requirements and solve all your problems by our 350-401 Exam Vce certification guide.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement explains why Type 1 hypervisor is considered more efficient than Type 2 hypervisor?
A. Type 1 hypervisor enables other operating systems to run on it
B. Type 1 hypervisor runs directly on the physical hardware of the host machine without relying on the underlying OS
C. Type 1 hypervisor relics on the existing OS of the host machine to access CPU, memory, storage, and network resources.
D. Type 1 hypervisor is the only type of hypervisor that supports hardware acceleration techniques
Answer: B
Explanation:
There are two types of hypervisors: type 1 and type 2 hypervisor.
In type 1 hypervisor (or native hypervisor), the hypervisor is installed directly on the physical server.
Then instances of an operating system (OS) are installed on the hypervisor. Type 1 hypervisor has direct access to the hardware resources. Therefore they are more efficient than hosted architectures.
Some examples of type 1 hypervisor are VMware vSphere/ESXi, Oracle VM Server, KVM and
Microsoft Hyper-V.
In contrast to type 1 hypervisor, a type 2 hypervisor (or hosted hypervisor) runs on top of an operating system and not the physical hardware directly. A big advantage of Type 2 hypervisors is that management console software is not required.
QUESTION NO: 2
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 3
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
In addition, it is very easy and convenient to make notes during the study for IBM C1000-177 real test, which can facilitate your reviewing. VMware 6V0-31.24 - After we develop a new version, we will promptly notify you. If you are not sure about your exam, choosing our WGU Integrated-Physical-Sciences exam cram file will be a good choice for candidates. Salesforce Mobile-Solutions-Architecture-Designer - You can choose one or more versions that you are most interested in, and then use your own judgment. Now, don't wasting time again, just start from our WGU Organizational-Behaviors-and-Leadership VCE dumps.
Updated: May 28, 2022