To make our 350-401 Exam Vce simulating exam more precise, we do not mind splurge heavy money and effort to invite the most professional teams into our group. Omgzlook is a leading platform in this area by offering the most accurate 350-401 Exam Vce exam questions to help our customers to pass the exam. And we are grimly determined and confident in helping you. After you used Omgzlook Cisco 350-401 Exam Vce dumps, you still fail in 350-401 Exam Vce test and then you will get FULL REFUND. This is Omgzlook's commitment to all candidates. Next, enter the payment page, it is noteworthy that we only support credit card payment, do not support debit card.
CCNP Enterprise 350-401 Don’t hesitate any more.
The 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Exam Vce certification exam training tools contains the latest studied materials of the exam supplied by IT experts. To pass the exam in limited time, you will find it as a piece of cake with the help of our Latest Test Cram 350-401 Materials study engine! Our Latest Test Cram 350-401 Materials practice materials are suitable to exam candidates of different levels.
The industrious Omgzlook's IT experts through their own expertise and experience continuously produce the latest Cisco 350-401 Exam Vce training materials to facilitate IT professionals to pass the Cisco certification 350-401 Exam Vce exam. The certification of Cisco 350-401 Exam Vce more and more valuable in the IT area and a lot people use the products of Omgzlook to pass Cisco certification 350-401 Exam Vce exam. Through so many feedbacks of these products, our Omgzlook products prove to be trusted.
Cisco 350-401 Exam Vce - Select Omgzlook is to choose success.
One strong point of our APP online version is that it is convenient for you to use our 350-401 Exam Vce exam dumps even though you are in offline environment. In other words, you can prepare for your 350-401 Exam Vce exam with under the guidance of our 350-401 Exam Vce training materials anywhere at any time. Just take action to purchase we would be pleased to make you the next beneficiary of our 350-401 Exam Vce exam practice. Trust us and you will get what you are dreaming!
A bad situation can show special integrity. When to face of a difficult time, only the bravest people could take it easy.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement explains why Type 1 hypervisor is considered more efficient than Type 2 hypervisor?
A. Type 1 hypervisor enables other operating systems to run on it
B. Type 1 hypervisor runs directly on the physical hardware of the host machine without relying on the underlying OS
C. Type 1 hypervisor relics on the existing OS of the host machine to access CPU, memory, storage, and network resources.
D. Type 1 hypervisor is the only type of hypervisor that supports hardware acceleration techniques
Answer: B
Explanation:
There are two types of hypervisors: type 1 and type 2 hypervisor.
In type 1 hypervisor (or native hypervisor), the hypervisor is installed directly on the physical server.
Then instances of an operating system (OS) are installed on the hypervisor. Type 1 hypervisor has direct access to the hardware resources. Therefore they are more efficient than hosted architectures.
Some examples of type 1 hypervisor are VMware vSphere/ESXi, Oracle VM Server, KVM and
Microsoft Hyper-V.
In contrast to type 1 hypervisor, a type 2 hypervisor (or hosted hypervisor) runs on top of an operating system and not the physical hardware directly. A big advantage of Type 2 hypervisors is that management console software is not required.
QUESTION NO: 2
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 3
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
And we believe you will pass the Network Appliance NS0-521 exam just like the other people! Omgzlook Cisco Oracle 1z1-071 exam training materials is the best choice to help you pass the exam. All you have to do is to pay a small fee on our IBM C1000-162 practice materials, and then you will have a 99% chance of passing the exam and then embrace a good life. It is inconceivable that Omgzlook Cisco SAP C-BW4H-2404 test dumps have 100% hit rate. Considering your practical constraint and academic requirements of the SAP C_C4H620_34 exam preparation, you may choose the SAP C_C4H620_34 practice materials with following traits.
Updated: May 28, 2022