In order to gain the trust of new customers, 350-401 Exam Tutorial practice materials provide 100% pass rate guarantee for all purchasers. We have full confidence that you can successfully pass the exam as long as you practice according to the content provided by 350-401 Exam Tutorial exam dump. Of course, if you fail to pass the exam, we will give you a 100% full refund. So the website of Omgzlook can get the attention of a lot of candidates. They believe and rely on us. Though the content is the same, but their displays are totally different and functionable.
CCNP Enterprise 350-401 As well as our after-sales services.
CCNP Enterprise 350-401 Exam Tutorial - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Not every training materials on the Internet have such high quality. Once you choose our products, you choose high-efficiency exam preparation materials which will help you pass exam for sure. We are absolutely responsible for you.
Do you feel headache looking at so many IT certification exams and so many exam materials? What should you do? Which materials do you choose? If you don't know how to choose, I choose your best exam materials for you. You can choose to attend Cisco 350-401 Exam Tutorial exam which is the most popular in recent. Getting 350-401 Exam Tutorial certificate, you will get great benefits.
Cisco 350-401 Exam Tutorial - So you need to be brave enough to have a try.
Most IT workers prefer to choose our online test engine for their 350-401 Exam Tutorial exam prep because online version is more flexible and convenient. With the help of our online version, you can not only practice our 350-401 Exam Tutorial exam pdf in any electronic equipment, but also make you feel the atmosphere of 350-401 Exam Tutorial actual test. The exam simulation will mark your mistakes and help you play well in 350-401 Exam Tutorial practice test.
And all of the PDF version, online engine and windows software of the 350-401 Exam Tutorial study guide will be tested for many times. Although it is not easy to solve all technology problems, we have excellent experts who never stop trying.
350-401 PDF DEMO:
QUESTION NO: 1
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 2
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
We guarantee that our IBM C1000-177 exam prep is cost-efficient and affordable for most candidates who want to get certification quickly in their first try. The number of questions of the APMG-International Better-Business-Cases-Practitioner study materials you have done has a great influence on your passing rate. Dear everyone, you can download the ISM CORe free demo for a little try. SAP C_SIGDA_2403 - The high quality of our products also embodies in its short-time learning. Our website provides you the latest CyberArk CPC-SEN practice test with best quality that will lead you to success in obtaining the certification exam.
Updated: May 28, 2022