According to our statistics on the data so far, the passing rate of the students who have purchased one exam exceeds 99%, which is enough to see that 350-401 Exam Syllabus test guide is a high-quality product that can help you to realize your dream. The industry experts hired by 350-401 Exam Syllabus exam materials are those who have been engaged in the research of 350-401 Exam Syllabus exam for many years. They have a keen sense of smell in the direction of the exam. Your 350-401 Exam Syllabus certification success is just a step away and is secured with 100% money back guarantee. Due to its unique features, it is ideal for the majority of the students. With 350-401 Exam Syllabus guide torrent, you may only need to spend half of your time that you will need if you didn’t use our products successfully passing a professional qualification exam.
CCNP Enterprise 350-401 So just open our websites in your computer.
We suggest you choose our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Exam Syllabus test prep ----an exam braindump leader in the field. You can find their real comments in the comments sections. There must be good suggestions for you on the 350-401 Frenquent Update learning quiz as well.
How to get the test 350-401 Exam Syllabus certification in a short time, which determines enough qualification certificates to test our learning ability and application level. This may be a contradiction of the problem, we hope to be able to spend less time and energy to take into account the test 350-401 Exam Syllabus certification, but the qualification examination of the learning process is very wasted energy, so how to achieve the balance? Our 350-401 Exam Syllabus exam prep can be done with its high-efficient merit. Try it now!
Cisco 350-401 Exam Syllabus - It can help you to pass the exam successfully.
With 350-401 Exam Syllabus study engine, you will get rid of the dilemma that you work hard but cannot improve. With our 350-401 Exam Syllabus learning materials, you can spend less time but learn more knowledge than others. 350-401 Exam Syllabus exam questions will help you reach the peak of your career. Just think of that after you get the 350-401 Exam Syllabus certification, you will have a lot of opportunities of going to biger and better company and getting higher incomes! what a brighter future!
Omgzlook allows you to have a bright future. And allows you to work in the field of information technology with high efficiency.
350-401 PDF DEMO:
QUESTION NO: 1
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 2
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
In order to facilitate the user's offline reading, the Fortinet FCP_FCT_AD-7.2 study braindumps can better use the time of debris to learn, especially to develop PDF mode for users. To pass the Cisco SAP C-CPI-2404 exam is a dream who are engaged in IT industry. For we have three different versions of our Microsoft AZ-104 study guide, and you will have different feelings if you have a try on them. It has the best training materials, which is Omgzlook;s Cisco CheckPoint 156-315.81 exam training materials. At present, our SAP C_ABAPD_2309study materials can give you a ray of hope.
Updated: May 28, 2022