350-401 Exam Sample - Latest Exam 350-401 Dumps Questions & Implementing Cisco Enterprise Network Core Technologies 350-401 Encor - Omgzlook

It can help you to pass the exam successfully. Before you decide to buy our Cisco 350-401 Exam Sample exam materials, you can download our free test questions, including the PDF version and the software version. If you need software versions please do not hesitate to obtain a copy from our customer service staff. 350-401 Exam Sample exam questions will help you reach the peak of your career. Just think of that after you get the 350-401 Exam Sample certification, you will have a lot of opportunities of going to biger and better company and getting higher incomes! Omgzlook allows you to have a bright future.

CCNP Enterprise 350-401 So try to trust us.

Have you signed up for Cisco 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Exam Sample exam? Will masses of reviewing materials and questions give you a headache? Omgzlook can help you to solve this problem. Our windows software and online test engine of the 350-401 Valid Exam Study Guide exam questions are suitable for all age groups. At the same time, our operation system is durable and powerful.

Many times getting a right method is important and more efficient than spending too much time and money in vain. Our Omgzlook team devote themselves to studying the best methods to help you pass 350-401 Exam Sample exam certification. From the time when you decide whether to purchase our 350-401 Exam Sample exam software or not, we have provided you with comprehensive guarantees, including free demo download before buying, payment guarantee in purchase process, one-year free update service after you purchased 350-401 Exam Sample exam software, and full refund guarantee of dump cost if you fail 350-401 Exam Sample exam certification, which are all our promises to ensure customer interests.

Cisco 350-401 Exam Sample - When choosing a product, you will be entangled.

When people take the subway staring blankly, you can use Pad or cell phone to see the PDF version of the 350-401 Exam Sample study materials. While others are playing games online, you can do online 350-401 Exam Sample exam questions. We are sure that as you hard as you are, you can pass 350-401 Exam Sample exam easily in a very short time. While others are surprised at your achievement, you might have found a better job.

Our study materials allow users to use the 350-401 Exam Sample certification guide for free to help users better understand our products better. Even if you find that part of it is not for you, you can still choose other types of learning materials in our study materials.

350-401 PDF DEMO:

QUESTION NO: 1
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.

QUESTION NO: 2
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.

QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.

QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D

QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html

IIA IIA-CIA-Part1 - Cisco online test dumps can allow self-assessment test. Splunk SPLK-1003 - We guarantee that you absolutely don't need to spend extra money to buy other products. We are famous for our high pass-rate IAPP AIGP exam cram. Cisco 300-635 - If you really lack experience, you do not know which one to choose. PMI PMP-CN - Excellent & valid VCE dumps will make you achieve your dream and go to the peak of your life ahead of other peers.

Updated: May 28, 2022