We provide our customers with the most reliable learning materials about 350-401 Exam Sample certification exam and the guarantee of pass. We assist you to prepare the key knowledge points of 350-401 Exam Sample actual test and obtain the up-to-dated exam answers. All 350-401 Exam Sample test questions offered by us are tested and selected by our senior experts in IT filed, which only need little time to focus on the practice and the preparation. Just look at the comments on the 350-401 Exam Sample training guide, you will know that how popular they are among the candidates. Our 350-401 Exam Sample exam braindumps have become a brand that is good enough to stand out in the market. As a wise person, it is better to choose our 350-401 Exam Sample study material without any doubts.
CCNP Enterprise 350-401 And the number of our free coupon is limited.
Our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Exam Sample exam braindumps are famous for its advantage of high efficiency and good quality which are carefully complied by the professionals. You are going to find the online version of our Test 350-401 Lab Questions exam prep applies to all electronic equipment, including telephone, computer and so on. On the other hand, if you decide to use the online version of our Test 350-401 Lab Questions study materials, you don’t need to worry about no network.
It is all about the superior concrete and precision of our 350-401 Exam Sample learning quiz that help. Every page and every points of knowledge have been written from professional experts who are proficient in this line who are being accounting for this line over ten years. Come and buy our 350-401 Exam Sample study guide, you will be benefited from it.
Cisco 350-401 Exam Sample - And you will have the demos to check them out.
As the talent team grows, every fighter must own an extra technical skill to stand out from the crowd. To become more powerful and struggle for a new self, getting a professional 350-401 Exam Sample certification is the first step beyond all questions. We suggest you choose our 350-401 Exam Sample test prep ----an exam braindump leader in the field. Since we release the first set of the 350-401 Exam Sample quiz guide, we have won good response from our customers and until now---a decade later, our products have become more mature and win more recognition. Therefore, for expressing our gratitude towards the masses of candidates’ trust, our 350-401 Exam Sample exam torrent will also be sold at a discount and many preferential activities are waiting for you.
And we will try our best to satisfy our customers with better quatily and services. Our loyal customers give our 350-401 Exam Sample exam materials strong support.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
How to get the test Juniper JN0-223 certification in a short time, which determines enough qualification certificates to test our learning ability and application level. But they forgot to answer the other questions, our CheckPoint 156-521 training guide can help you solve this problem and get used to the pace. If you want to get a comprehensive idea about our real Amazon DOP-C02 study materials. They will accurately and quickly provide you with Cisco certification ACAMS CAMS-KR exam materials and timely update Cisco ACAMS CAMS-KR exam certification exam practice questions and answers and binding. SAP C_TS414_2023 - We would like to extend our sincere appreciation for you to browse our website, and we will never let you down.
Updated: May 28, 2022