350-401 Exam Papers - Cisco Exam 350-401 Dumps - Implementing Cisco Enterprise Network Core Technologies 350-401 Encor - Omgzlook

Nowadays the requirements for jobs are higher than any time in the past. The job-hunters face huge pressure because most jobs require both working abilities and profound major knowledge. Passing 350-401 Exam Papers exam can help you find the ideal job. Because Omgzlook exam dumps contain all questions you can encounter in the actual exam, all you need to do is to memorize these questions and answers which can help you 100% pass the exam. This is the royal road to pass 350-401 Exam Papers exam. However, our 350-401 Exam Papers training materials can offer better condition than traditional practice materials and can be used effectively.

CCNP Enterprise 350-401 If you fail, don't forget to learn your lesson.

So the PDF version of our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Exam Papers exam questions is convenient. Don't hesitate to get help from our customer assisting. Downloading the 350-401 Reliable Braindumps Files free demo doesn't cost you anything and you will learn about the pattern of our practice exam and the accuracy of our 350-401 Reliable Braindumps Files test answers.

We often ask, what is the purpose of learning? Why should we study? Why did you study for 350-401 Exam Papersexam so long? As many people think that, even if one day we forget the formula for the area of a triangle, we can still live very well, but if it were not for the knowledge of learning 350-401 Exam Papers exam and try to obtain certification, how can we have the opportunity to good to future life? So, the examination is necessary, only to get the test 350-401 Exam Papers certification, get a certificate, to prove better us, to pave the way for our future life.

Cisco 350-401 Exam Papers - Just come and buy it!

The dynamic society prods us to make better. Our services on our 350-401 Exam Papers exam questions are also dependable in after-sales part with employees full of favor and genial attitude towards job. So our services around the 350-401 Exam Papers training materials are perfect considering the needs of exam candidates all-out. They bravely undertake the duties. Our staff knows our 350-401 Exam Papers study quiz play the role of panacea in the exam market which aim to bring desirable outcomes to you.

The series of 350-401 Exam Papers measures we have taken is also to allow you to have the most professional products and the most professional services. I believe that in addition to our 350-401 Exam Papers exam questions, you have also used a variety of products.

350-401 PDF DEMO:

QUESTION NO: 1
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.

QUESTION NO: 2
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D

QUESTION NO: 3
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID

QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.

QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.

We can guarantee that we will keep the most appropriate price because we want to expand our reputation of Microsoft MB-230 preparation dumps in this line and create a global brand. Microsoft DP-420 - Closed cars will not improve, and when we are reviewing our qualifying examinations, we should also pay attention to the overall layout of various qualifying examinations. CompTIA N10-008 - Service is first! Google Professional-Cloud-Network-Engineer - This kind of learning method is very convenient for the user, especially in the time of our fast pace to get Cisco certification. With our great efforts, our SAP C-S4CFI-2402practice dumps have been narrowed down and targeted to the SAP C-S4CFI-2402 examination.

Updated: May 28, 2022