So Omgzlook Cisco 350-401 Exam Labs exam certification issues is what they indispensable. Select the appropriate shortcut just to guarantee success. The Omgzlook exists precisely to your success. Omgzlook's Cisco 350-401 Exam Labs exam training materials is a proven software. With it you will get better theory than ever before. Dear candidates, have you thought to participate in any Cisco 350-401 Exam Labs exam training courses? In fact, you can take steps to pass the certification.
CCNP Enterprise 350-401 It can guarantee you 100% pass the exam.
This part of the candidates need to be fully prepared to allow them to get the highest score in the 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Exam Labs exam, make their own configuration files compatible with market demand. Omgzlook dumps has high hit rate that will help you to pass Cisco Exam 350-401 Certification Cost test at the first attempt, which is a proven fact. So, the quality of Omgzlook practice test is 100% guarantee and Omgzlook dumps torrent is the most trusted exam materials.
You will encounter the complex questions in the exam, but Omgzlook can help you to pass the exam easily. Omgzlook's Cisco 350-401 Exam Labs exam training material includes all the knowledge that must be mastered for the purpose of passing the Cisco 350-401 Exam Labs exam. Omgzlook's Cisco 350-401 Exam Labs exam training materials are bring the greatest success rate to all the candicates who want to pass the exam.
Cisco 350-401 Exam Labs - We also offer a year of free updates.
Are you worrying about how to pass Cisco 350-401 Exam Labs test? Now don't need to worry about the problem. Omgzlook that committed to the study of Cisco 350-401 Exam Labs certification exam for years has a wealth of experience and strong exam dumps to help you effectively pass your exam. Whether to pass the exam successfully, it consists not in how many materials you have seen, but in if you find the right method. Omgzlook is the right method which can help you sail through Cisco 350-401 Exam Labs certification exam.
Its accuracy rate is 100% and let you take the exam with peace of mind, and pass the exam easily. In order to meet the needs of each candidate, the team of IT experts in Omgzlook are using their experience and knowledge to improve the quality of exam training materials constantly.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement explains why Type 1 hypervisor is considered more efficient than Type 2 hypervisor?
A. Type 1 hypervisor enables other operating systems to run on it
B. Type 1 hypervisor runs directly on the physical hardware of the host machine without relying on the underlying OS
C. Type 1 hypervisor relics on the existing OS of the host machine to access CPU, memory, storage, and network resources.
D. Type 1 hypervisor is the only type of hypervisor that supports hardware acceleration techniques
Answer: B
Explanation:
There are two types of hypervisors: type 1 and type 2 hypervisor.
In type 1 hypervisor (or native hypervisor), the hypervisor is installed directly on the physical server.
Then instances of an operating system (OS) are installed on the hypervisor. Type 1 hypervisor has direct access to the hardware resources. Therefore they are more efficient than hosted architectures.
Some examples of type 1 hypervisor are VMware vSphere/ESXi, Oracle VM Server, KVM and
Microsoft Hyper-V.
In contrast to type 1 hypervisor, a type 2 hypervisor (or hosted hypervisor) runs on top of an operating system and not the physical hardware directly. A big advantage of Type 2 hypervisors is that management console software is not required.
QUESTION NO: 2
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 3
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
What we provide for you is the latest and comprehensive Network Appliance NS0-528 exam dumps, the safest purchase guarantee and the immediate update of Network Appliance NS0-528 exam software. SAP C-S4CFI-2402 - So, the competition is in fierce in IT industry. Juniper JN0-683 - The empty promise is not enough. CompTIA N10-009 - Miss the opportunity, you will regret it. Omgzlook is a reliable study center providing you the valid and correct Oracle 1z0-808-KR questions & answers for boosting up your success in the actual test.
Updated: May 28, 2022