With our test-oriented 350-401 Exam Format test prep in hand, we guarantee that you can pass the 350-401 Exam Format exam as easy as blowing away the dust, as long as you guarantee 20 to 30 hours practice with our 350-401 Exam Format study materials. The reason why we are so confident lies in the sophisticated expert group and technical team we have, which do duty for our solid support. They develop the 350-401 Exam Format exam guide targeted to real exam. If you choose the PDF version, you can download our study material and print it for studying everywhere. With our software version of 350-401 Exam Format exam material, you can practice in an environment just like the real examination. Besides, we do not break promise that once you fail the 350-401 Exam Format exam, we will make up to you and relieve you of any loss.
CCNP Enterprise 350-401 No company in the field can surpass us.
With high-quality 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Exam Format guide materials and flexible choices of learning mode, they would bring about the convenience and easiness for you. Because, after all, Latest Study Guide 350-401 Files is a very important certified exam of Cisco. But Latest Study Guide 350-401 Files exam is not so simple.
So their validity and authority are unquestionable. Our 350-401 Exam Format learning materials are just staring points for exam candidates, and you may meet several challenging tasks or exams in the future about computer knowledge, we can still offer help. Need any help, please contact with us again!
Now Cisco Cisco 350-401 Exam Format certification test is very popular.
No matter in the day or on the night, you can consult us the relevant information about our 350-401 Exam Format preparation exam through the way of chatting online or sending emails. I’m sure our 24-hour online service will not disappoint you as we offer our service 24/7 on our 350-401 Exam Format study materials. And we will give you the most considerate suggestions on our 350-401 Exam Format learning guide with all our sincere and warm heart.
So our IT technicians of Omgzlook take more efforts to study 350-401 Exam Format exam materials. All exam software from Omgzlook is the achievements of more IT elite.
350-401 PDF DEMO:
QUESTION NO: 1
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 2
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 3
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
Our company provides convenient service to the clients all around the world so that the clients all around the world can use our Lpi 300-300 study materials efficiently. Our Omgzlook devote themselves for years to develop the Huawei H19-301_V3.0 exam software to help more people who want to have a better development in IT field to pass Huawei H19-301_V3.0 exam. Fortinet ICS-SCADA - We believe our perfect service will make you feel comfortable when you are preparing for your exam. We have experienced education technicians and stable first-hand information to provide you with high quality & efficient SAP C_C4H630_34 training dumps. You can rest assured to buy the Google Professional-Cloud-Architect exam dumps from our company.
Updated: May 28, 2022