We try to offer the best 350-401 Exam Dumps exam braindumps to our customers. First of all, in order to give users a better experience, we have been updating the system of 350-401 Exam Dumps simulating exam to meet the needs of more users. After the new version appears, we will also notify the user at the first time. Our Omgzlook can have a good and quick provide of professional study materials about Cisco certification 350-401 Exam Dumps exam. Our Omgzlook IT experts are very experienced and their study materials are very close to the actual exam questions, almost the same. After you purchase our 350-401 Exam Dumps learning materials, we will still provide you with excellent service.
CCNP Enterprise 350-401 So that you can achieve a multiplier effect.
Our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Exam Dumps guide question dumps are suitable for all age groups. Education degree just mean that you have this learning experience only. And the real ability is exercised in practice, it is not necessarily linked with the academic qualifications.
With the help of 350-401 Exam Dumps guide questions, you can conduct targeted review on the topics which to be tested before the exam, and then you no longer have to worry about the problems that you may encounter a question that you are not familiar with during the exam. With 350-401 Exam Dumps learning materials, you will not need to purchase any other review materials. Please be assured that with the help of 350-401 Exam Dumps learning materials, you will be able to successfully pass the exam.
To help you pass the Cisco 350-401 Exam Dumps exam is our goal.
Omgzlook can not only save you valuable time, but also make you feel at ease to participate in the exam and pass it successfully. Omgzlook has good reliability and a high reputation in the IT professionals. You can free download the part of Cisco 350-401 Exam Dumps exam questions and answers Omgzlook provide as an attempt to determine the reliability of our products. I believe you will be very satisfied of our products. I have confidence in our Omgzlook products that soon Omgzlook's exam questions and answers about Cisco 350-401 Exam Dumps will be your choice and you will pass Cisco certification 350-401 Exam Dumps exam successfully. It is wise to choose our Omgzlook and Omgzlook will prove to be the most satisfied product you want.
Our products are just suitable for you. Our 350-401 Exam Dumps exam training dumps will help you master the real test and prepare well for your exam.
350-401 PDF DEMO:
QUESTION NO: 1
Which description of an SD-Access wireless network infrastructure deployment is true?
A. The wireless client is part of the fabric overlay.
B. The access point is part of the fabric underlay.
C. The WLC is part of the fabric underlay.
D. The access point is part the fabric overlay.
Answer: B
QUESTION NO: 2
Which statement about a fabric access point is true?
A. It is in local mode an must connected directly to the fabric edge switch.
B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
C. It is in FlexConnect mode and must be connected directly to the fabric border node.
D. It is in local mode an must be connected directly to the fabric border node.
Answer: A
Explanation:
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric
WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html
QUESTION NO: 3
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 4
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
HP HP2-I59 - The training materials of Omgzlook are developed by many IT experts' continuously using their experience and knowledge to study, and the quality is very good and have very high accuracy. You will get your SAP C_TS4FI_2023 certification with little time and energy by the help of out dumps. Oracle 1z1-071 - If you buy the Omgzlook's products, we will not only spare no effort to help you pass the certification exam, but also provide a free update and upgrade service. As we all know, it is not an easy thing to gain the Salesforce Industries-CPQ-Developer certification. Salesforce ADM-201 - If you do not pass the exam, Omgzlook will full refund to you.
Updated: May 28, 2022