For a long time, high quality is our 350-401 Exam Bootcamp exam questions constantly attract students to participate in the use of important factors, only the guarantee of high quality, to provide students with a better teaching method, and at the same time the 350-401 Exam Bootcamp practice quiz brings more outstanding teaching effect. Our high-quality 350-401 Exam Bootcamp} learning guide help the students know how to choose suitable for their own learning method, our 350-401 Exam Bootcamp study materials are a very good option. As is known to us, there are best sale and after-sale service of the 350-401 Exam Bootcamp certification training dumps all over the world in our company. Our company has employed a lot of excellent experts and professors in the field in the past years, in order to design the best and most suitable 350-401 Exam Bootcamp latest questions for all customers. You can effortlessly yield the printouts of 350-401 Exam Bootcamp exam study material as well, PDF files make it extremely simple for you to switch to any topics with a click.
CCNP Enterprise 350-401 Their efficiency has far beyond your expectation!
If you try on our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Exam Bootcamp exam braindumps, you will be very satisfied with its content and design. The moment you money has been transferred to our account, and our system will send our 350-401 Reliable Test Practicetraining dumps to your mail boxes so that you can download 350-401 Reliable Test Practice exam questions directly. It is fast and convenient out of your imagination.
Our 350-401 Exam Bootcamp quiz guide is of high quality, which mainly reflected in the passing rate. We can promise higher qualification rates for our 350-401 Exam Bootcamp exam question than materials of other institutions. Because our products are compiled by experts from various industries and they are based on the true problems of the past years and the development trend of the industry.
Our Cisco 350-401 Exam Bootcamp exam materials can help you realize it.
Briefly speaking, our 350-401 Exam Bootcamp training guide gives priority to the quality and service and will bring the clients the brand new experiences and comfortable feelings. For we have engaged in this career for years and we are always trying our best to develope every detail of our 350-401 Exam Bootcamp study quiz. With our 350-401 Exam Bootcamp exam questions, you will find the exam is just a piece of cake. What are you still hesitating for? Hurry to buy our 350-401 Exam Bootcamp learning engine now!
Our 350-401 Exam Bootcamp guide materials are high quality and high accuracy rate products. It is all about the superior concreteness and precision of the 350-401 Exam Bootcamp exam questions that helps.
350-401 PDF DEMO:
QUESTION NO: 1
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 2
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 3
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 4
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
In order to promise the high quality of our Cisco 300-615 exam questions, our company has outstanding technical staff, and has perfect service system after sale. We can claim that once you study with our IIBA ECBA exam questions for 20 to 30 hours, then you will be albe to pass the exam with confidence. If you decide to buy our Microsoft MB-310 study questions, you can get the chance that you will pass your Microsoft MB-310 exam and get the certification successfully in a short time. Even newbies will be tricky about this process on the HP HPE0-S59 exam questions. The purpose of providing demo is to let customers understand our part of the topic and what is the form of our SAP P-SAPEA-2023 study materials when it is opened.
Updated: May 28, 2022