We attract customers by our fabulous 350-401 Exam Bootcamp certification material and high pass rate, which are the most powerful evidence to show our strength. We are so proud to tell you that according to the statistics from our customers’ feedback, the pass rate among our customers who prepared for the exam with our 350-401 Exam Bootcamp test guide have reached as high as 99%, which definitely ranks the top among our peers. Hence one can see that the Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) learn tool compiled by our company are definitely the best choice for you. A good learning platform should not only have abundant learning resources, but the most intrinsic things are very important, and the most intuitive things to users are also indispensable. The 350-401 Exam Bootcamp test material is professional editorial team, each test product layout and content of proofreading are conducted by experienced professionals who have many years of rich teaching experiences, so by the editor of fine typesetting and strict check, the latest 350-401 Exam Bootcamp exam torrent is presented to each user's page is refreshing, but also ensures the accuracy of all kinds of learning materials is extremely high. So we take this factor into consideration, develop the most efficient way for you to prepare for the 350-401 Exam Bootcamp exam, that is the real questions and answers practice mode, firstly, it simulates the real Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) test environment perfectly, which offers greatly help to our customers.
CCNP Enterprise 350-401 You will never come across system crashes.
If you encounter some problems when using our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Exam Bootcamp study materials, you can also get them at any time. Please check it carefully. If you need the invoice, please contact our online workers.
As long as you study with our 350-401 Exam Bootcamp exam braindumps for 20 to 30 hours that we can claim that you will pass the exam for sure. We really need this efficiency. Perhaps you have doubts about this "shortest time." I believe that after you understand the professional configuration of 350-401 Exam Bootcamp training questions, you will agree with what I said.
Cisco 350-401 Exam Bootcamp - Many people think this is incredible.
We have chosen a large number of professionals to make 350-401 Exam Bootcamp learning question more professional, while allowing our study materials to keep up with the times. Of course, we do it all for you to get the information you want, and you can make faster progress. You can also get help from 350-401 Exam Bootcamp exam training professionals at any time when you encounter any problems. We can be sure that with the professional help of our 350-401 Exam Bootcamp test guide you will surely get a very good experience. Good materials and methods can help you to do more with less. Choose 350-401 Exam Bootcamp test guide to get you closer to success.
Some customers might worry that passing the exam is a time-consuming process. Now our 350-401 Exam Bootcamp actual test guide can make you the whole relax down, with all the troubles left behind.
350-401 PDF DEMO:
QUESTION NO: 1
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 2
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 3
Which statement about a fabric access point is true?
A. It is in local mode an must connected directly to the fabric edge switch.
B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
C. It is in FlexConnect mode and must be connected directly to the fabric border node.
D. It is in local mode an must be connected directly to the fabric border node.
Answer: A
Explanation:
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric
WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html
QUESTION NO: 4
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 5
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
But our HP HPE7-A02 exam questions will help you pass the exam by just one go for we have the pass rate high as 98% to 100%. Salesforce Energy-and-Utilities-Cloud - We provide free tryout before the purchase to let you decide whether it is valuable or not by yourself. Salesforce Marketing-Cloud-Intelligence - Time is so important to everyone because we have to use our limited time to do many things. And you will find that it is easy to understand the content of the Microsoft MB-220 learning guide for our experts have simplified the questions and answers. Generally speaking, 98 % - 99 % of the users can successfully pass the Fortinet FCP_WCS_AD-7.4 exam, obtaining the corresponding certificate.
Updated: May 28, 2022