We are glad to help you get the certification with our best 350-401 Dumps Free study materials successfully. Are you aware of the importance of the 350-401 Dumps Free certification? If your answer is not, you may place yourself at the risk of be eliminated by the labor market. As we know, the 350-401 Dumps Free certification is the main reflection of your ability. No matter you are exam candidates of high caliber or newbies, our 350-401 Dumps Free exam quiz will be your propulsion to gain the best results with least time and reasonable money. Not only because the outstanding content of 350-401 Dumps Free real dumps that produced by our professional expert but also for the reason that we have excellent vocational moral to improve our 350-401 Dumps Free learning materials quality. On the other hand, using free trial downloading before purchasing, I can promise that you will have a good command of the function of our 350-401 Dumps Free exam prepare.
CCNP Enterprise 350-401 Action always speaks louder than words.
If you are satisfied with our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Dumps Free training guide, come to choose and purchase. We have free demos on the website for our customers to download if you still doubt our products, and you can check whether it is the right one for you before purchase as well. Our Flexible 350-401 Testing Engine exam materials are famous among candidates.
All experts and professors of our company have been trying their best to persist in innovate and developing the 350-401 Dumps Free test training materials all the time in order to provide the best products for all people and keep competitive in the global market. We believe that the study materials will keep the top selling products. We sincerely hope that you can pay more attention to our 350-401 Dumps Free study questions.
Our Cisco 350-401 Dumps Free practice quiz is unique in the market.
With the improvement of people’s living standards, there are more and more highly educated people. To defeat other people in the more and more fierce competition, one must demonstrate his extraordinary strength. Today, getting 350-401 Dumps Free certification has become a trend, and 350-401 Dumps Free exam dump is the best weapon to help you pass certification. We all know that obtaining the 350-401 Dumps Free certification is very difficult, and students who want to pass the exam often have to spend a lot of time and energy. After years of hard work, the experts finally developed a set of perfect learning materials 350-401 Dumps Free practice materials that would allow the students to pass the exam easily. With our study materials, you only need 20-30 hours of study to successfully pass the exam and reach the peak of your career. What are you waiting for? Come and buy it now.
And our website has already became a famous brand in the market because of our reliable 350-401 Dumps Free exam questions. Different from all other bad quality practice materials that cheat you into spending much money on them, our 350-401 Dumps Free exam materials are the accumulation of professional knowledge worthy practicing and remembering.
350-401 PDF DEMO:
QUESTION NO: 1
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 2
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 3
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
Are you still feeling distressed for expensive learning materials? Are you still struggling with complicated and difficult explanations in textbooks? Do you still hesitate in numerous tutorial materials? EMC D-MSS-DS-23 study guide can help you to solve all these questions. SAP C_TS414_2023 - For more textual content about practicing exam questions, you can download our products with reasonable prices and get your practice begin within 5 minutes. Cisco 300-630 - Just make your own decisions. Salesforce Interaction-Studio-Accredited-Professional - And you can free donwload the demos to have a look. So every year a large number of people take ISTQB CTAL-TTA tests to prove their abilities.
Updated: May 28, 2022