If the user does not complete the mock test question in a specified time, the practice of all 350-401 Dumps Files valid practice questions previously done by the user will automatically uploaded to our database. The system will then generate a report based on the user's completion results, and a report can clearly understand what the user is good at. Finally, the transfer can be based on the 350-401 Dumps Files valid practice questions report to develop a learning plan that meets your requirements. The price of our 350-401 Dumps Files learning guide is among the range which you can afford and after you use our 350-401 Dumps Files study materials you will certainly feel that the value of the 350-401 Dumps Files exam questions far exceed the amount of the money you pay for the pass rate of our practice quiz is 98% to 100% which is unmarched in the market. Choosing our 350-401 Dumps Files study guide equals choosing the success and the perfect service. Our online service staff is professionally trained, and users' needs about 350-401 Dumps Files test guide can be clearly understood by them.
Our 350-401 Dumps Files exam questions are your best choice.
Our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Dumps Files exam questions have been widely acclaimed among our customers, and the good reputation in industry prove that choosing our study materials would be the best way for you, and help you gain the 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Dumps Files certification successfully. According to the research statistics, we can confidently tell that 99% candidates after using our products have passed the Accurate 350-401 Answers exam. Our Accurate 350-401 Answers learning questions engage our working staff in understanding customers’ diverse and evolving expectations and incorporate that understanding into our strategies, thus you can 100% trust our Accurate 350-401 Answers exam engine.
The content of our 350-401 Dumps Files practice engine is based on real exam by whittling down superfluous knowledge without delinquent mistakes rather than dropping out of reality. Being subjected to harsh tests of market, our 350-401 Dumps Files exam questions are highly the manifestation of responsibility carrying out the tenets of customer oriented. And our 350-401 Dumps Files study materials are warmly praised and welcomed by the customers all over the world.
Cisco 350-401 Dumps Files - Our company is rated as outstanding enterprise.
Our experts are researchers who have been engaged in professional qualification 350-401 Dumps Files exams for many years and they have a keen sense of smell in the direction of the examination. Therefore, with our 350-401 Dumps Files study materials, you can easily find the key content of the exam and review it in a targeted manner so that you can successfully pass the 350-401 Dumps Files exam. We have free demos of the 350-401 Dumps Files exam materials that you can try before payment.
We have taken all your worries into consideration. Also, we adopt the useful suggestions about our 350-401 Dumps Files study materials from our customers.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement about a fabric access point is true?
A. It is in local mode an must connected directly to the fabric edge switch.
B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
C. It is in FlexConnect mode and must be connected directly to the fabric border node.
D. It is in local mode an must be connected directly to the fabric border node.
Answer: A
Explanation:
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric
WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html
QUESTION NO: 2
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 3
Which description of an SD-Access wireless network infrastructure deployment is true?
A. The wireless client is part of the fabric overlay.
B. The access point is part of the fabric underlay.
C. The WLC is part of the fabric underlay.
D. The access point is part the fabric overlay.
Answer: B
QUESTION NO: 4
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
Our service staff will help you solve the problem about the ServiceNow CIS-VR training materials with the most professional knowledge and enthusiasm. Therefore, our Cisco 700-695 study materials are attributive to high-efficient learning. First of all, if you are not sure about the CompTIA PT0-003 exam, the online service will find the most accurate and all-sided information for you, so that you can know what is going on about all about the exam and make your decision to buy CompTIA PT0-003 study guide or not. Cisco IBM C1000-173 is one of the important certification exams. SAP C-C4H51-2405 - During the clients use our products they can contact our online customer service staff to consult the problems about our products.
Updated: May 28, 2022