Our Cisco experts are continuously working on including new 350-401 Dumps Files questions material and we provide a guarantee that you will be able to pass the 350-401 Dumps Files exam on the first attempt. By using Omgzlook 350-401 Dumps Files exam questions, you will be able to understand the real exam 350-401 Dumps Files scenario. It will help you get verified 350-401 Dumps Files answers and you will be able to judge your 350-401 Dumps Files preparation level for the 350-401 Dumps Files exam. We can make sure that we must protect the privacy of all customers who have bought our 350-401 Dumps Files test questions. If you decide to use our 350-401 Dumps Files test torrent, we are assured that we recognize the importance of protecting your privacy and safeguarding the confidentiality of the information you provide to us. Our 350-401 Dumps Files actual exam are scientific and efficient learning system for a variety of professional knowledge that is recognized by many industry experts.
CCNP Enterprise 350-401 The reality is often cruel.
We are so proud to tell you that according to the statistics from our customers’ feedback, the pass rate among our customers who prepared for the exam with our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Dumps Files test guide have reached as high as 99%, which definitely ranks the top among our peers. Imagine, if you're using a Reliable 350-401 Soft Simulations practice materials, always appear this or that grammar, spelling errors, such as this will not only greatly affect your mood, but also restricted your learning efficiency. Therefore, good typesetting is essential for a product, especially education products, and the Reliable 350-401 Soft Simulations test material can avoid these risks very well.
All in all, high efficiency of 350-401 Dumps Files exam material is the reason for your selection. We understand our candidates have no time to waste, everyone wants an efficient learning. So we take this factor into consideration, develop the most efficient way for you to prepare for the 350-401 Dumps Files exam, that is the real questions and answers practice mode, firstly, it simulates the real Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) test environment perfectly, which offers greatly help to our customers.
Cisco 350-401 Dumps Files - Our experts have taken your worries seriously.
The content system of 350-401 Dumps Files exam simulation is constructed by experts. After-sales service of our study materials is also provided by professionals. If you encounter some problems when using our 350-401 Dumps Files study materials, you can also get them at any time. After you choose 350-401 Dumps Files preparation questions, professional services will enable you to use it in the way that suits you best, truly making the best use of it, and bringing you the best learning results.
When the interface displays that you have successfully paid for our 350-401 Dumps Files study materials, our specific online sales workers will soon deal with your orders. You will receive the 350-401 Dumps Files study materials no later than ten minutes.
350-401 PDF DEMO:
QUESTION NO: 1
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 2
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 3
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 5
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
Perhaps you have doubts about this "shortest time." I believe that after you understand the professional configuration of Palo Alto Networks PSE-Strata training questions, you will agree with what I said. SAP C-WZADM-2404 - These professional knowledge will become a springboard for your career, help you get the favor of your boss, and make your career reach it is peak. How much time do you think it takes to pass an exam? Our ASQ CSQE learning materials can assure you that you only need to spend twenty to thirty hours to pass the exam. We can be sure that with the professional help of our ASQ CQE test guide you will surely get a very good experience. Now our Amazon DOP-C02-KR actual test guide can make you the whole relax down, with all the troubles left behind.
Updated: May 28, 2022