Besides, we arranged our 350-401 Dumps Demo exam prep with clear parts of knowledge. You may wonder whether our 350-401 Dumps Demo real questions are suitable for your current level of knowledge about computer, as a matter of fact, our 350-401 Dumps Demo exam prep applies to exam candidates of different degree. By practicing and remember the points in them, your review preparation will be highly effective and successful. Omgzlook help you to find real Cisco 350-401 Dumps Demo exam preparation process in a real environment. If you are a beginner, and if you want to improve your professional skills, Omgzlook Cisco 350-401 Dumps Demo exam braindumps will help you to achieve your desire step by step. As a responsible company over ten years, we are trustworthy.
CCNP Enterprise 350-401 If you feel exam is a headache, don't worry.
CCNP Enterprise 350-401 Dumps Demo - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) But may not be able to achieve the desired effect. Our New Exam 350-401 Bootcamp Materials exam material is full of useful knowledge, which can strengthen your capacity for work. As we all know, it is important to work efficiently.
If you are concerned about the test, however, you can choose Omgzlook's Cisco 350-401 Dumps Demo exam training materials. No matter how low your qualifications, you can easily understand the content of the training materials. And you can pass the exam successfully.
Cisco 350-401 Dumps Demo - Our products are just suitable for you.
Omgzlook is a website to provide a targeted training for Cisco certification 350-401 Dumps Demo exam. Omgzlook is also a website which can not only make your expertise to get promoted, but also help you pass Cisco certification 350-401 Dumps Demo exam for just one time. The training materials of Omgzlook are developed by many IT experts' continuously using their experience and knowledge to study, and the quality is very good and have very high accuracy. Once you select our Omgzlook, we can not only help you pass Cisco certification 350-401 Dumps Demo exam and consolidate their IT expertise, but also have a one-year free after-sale Update Service.
You will get your 350-401 Dumps Demo certification with little time and energy by the help of out dumps. Omgzlook is constantly updated in accordance with the changing requirements of the Cisco certification.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement explains why Type 1 hypervisor is considered more efficient than Type 2 hypervisor?
A. Type 1 hypervisor enables other operating systems to run on it
B. Type 1 hypervisor runs directly on the physical hardware of the host machine without relying on the underlying OS
C. Type 1 hypervisor relics on the existing OS of the host machine to access CPU, memory, storage, and network resources.
D. Type 1 hypervisor is the only type of hypervisor that supports hardware acceleration techniques
Answer: B
Explanation:
There are two types of hypervisors: type 1 and type 2 hypervisor.
In type 1 hypervisor (or native hypervisor), the hypervisor is installed directly on the physical server.
Then instances of an operating system (OS) are installed on the hypervisor. Type 1 hypervisor has direct access to the hardware resources. Therefore they are more efficient than hosted architectures.
Some examples of type 1 hypervisor are VMware vSphere/ESXi, Oracle VM Server, KVM and
Microsoft Hyper-V.
In contrast to type 1 hypervisor, a type 2 hypervisor (or hosted hypervisor) runs on top of an operating system and not the physical hardware directly. A big advantage of Type 2 hypervisors is that management console software is not required.
QUESTION NO: 2
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 3
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
Huawei H13-511_V5.5 - If you buy the Omgzlook's products, we will not only spare no effort to help you pass the certification exam, but also provide a free update and upgrade service. As we all know, it is not an easy thing to gain the ATLASSIAN ACP-120 certification. You can also free online download the part of Omgzlook's Cisco certification Salesforce Salesforce-Hyperautomation-Specialist exam practice questions and answers as a try. Hitachi HQT-4230 - Come and check the free demo in our website you won’t regret it. Omgzlook Cisco Huawei H14-331_V1.0 exam questions and answers provide you test preparation information with everything you need.
Updated: May 28, 2022