Those free demos give you simple demonstration of our 350-401 Dump Check study guide. It is unquestionable necessary for you to have an initial look of them before buying any. They are some brief introductions and basic information but also impressive. And now our 350-401 Dump Check training materials have become the most popular 350-401 Dump Check practice engine in the international market. There are so many advantages of our 350-401 Dump Check guide quiz, and as long as you have a try on them, you will definitely love our exam dumps. The passing rate and the hit rate are also very high, there are thousands of candidates choose to trust our 350-401 Dump Check guide torrent and they have passed the exam.
CCNP Enterprise 350-401 It is your right time to make your mark.
Secondly, since our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Dump Check training quiz appeared on the market, seldom do we have the cases of customer information disclosure. Everyone's life course is irrevocable, so missing the opportunity of this time will be a pity. During the prolonged review, many exam candidates feel wondering attention is hard to focus.
The questions of our 350-401 Dump Check guide questions are related to the latest and basic knowledge. What’s more, our 350-401 Dump Check learning materials are committed to grasp the most knowledgeable points with the fewest problems. So 20-30 hours of study is enough for you to deal with the exam.
Cisco 350-401 Dump Check - As the saying goes, Rome is not build in a day.
In order to facilitate the wide variety of users' needs the 350-401 Dump Check study guide have developed three models with the highest application rate in the present - PDF, software and online. No matter you are a student, a office staff or even a housewife, you can always find your most situable way to study our 350-401 Dump Check exam Q&A. Generally speaking, these three versions of our 350-401 Dump Check learning guide can support study on paper, computer and all kinds of eletronic devices. They are quite convenient.
The 350-401 Dump Check latest dumps will be a shortcut for a lot of people who desire to be the social elite. If you try your best to prepare for the 350-401 Dump Check exam and get the related certification in a short time, it will be easier for you to receive the attention from many leaders of the big company, and it also will be very easy for many people to get a decent job in the labor market by the 350-401 Dump Check learning guide.
350-401 PDF DEMO:
QUESTION NO: 1
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 2
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
Our IAPP AIGP learning materials provide you with a platform of knowledge to help you achieve your wishes. According to the survey of our company, we have known that a lot of people hope to try the Pegasystems PEGACPBA88V1 test training materials from our company before they buy the study materials, because if they do not have a try about our study materials, they cannot sure whether the study materials from our company is suitable for them to prepare for the exam or not. In 21st century, every country had entered the period of talent competition, therefore, we must begin to extend our Microsoft SC-300 personal skills, only by this can we become the pioneer among our competitors. All the experts in our company are devoting all of their time to design the best ISQI CT-AI_v1.0_Worldtest question for all people. What is more, our SASInstitute A00-406 practice engine persists in creating a modern service oriented system and strive for providing more preferential activities for your convenience.
Updated: May 28, 2022