And there is no exaggeration that our pass rate for our 350-401 Collection Pdf study guide is 98% to 100% which is proved and tested by our loyal customers. As you may see the data on the website, our sales volumes of our 350-401 Collection Pdf exam questions are the highest in the market. You can browse our official websites to check our sales volumes. It is a pity if you don’t buy our 350-401 Collection Pdf study tool to prepare for the test Cisco certification. If you want to pass the exam smoothly buying our Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) guide dump is your ideal choice. How diligent they are!
CCNP Enterprise 350-401 Action always speaks louder than words.
If you are satisfied with our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Collection Pdf training guide, come to choose and purchase. Now, you are fortunate enough to come across our New 350-401 Test Test exam guide. We have free demos on the website for our customers to download if you still doubt our products, and you can check whether it is the right one for you before purchase as well.
All experts and professors of our company have been trying their best to persist in innovate and developing the 350-401 Collection Pdf test training materials all the time in order to provide the best products for all people and keep competitive in the global market. We believe that the study materials will keep the top selling products. We sincerely hope that you can pay more attention to our 350-401 Collection Pdf study questions.
Cisco 350-401 Collection Pdf - Just make your own decisions.
According to personal propensity and various understanding level of exam candidates, we have three versions of 350-401 Collection Pdf study guide for your reference. They are the versions of the PDF, Software and APP online. If you visit our website on our 350-401 Collection Pdf exam braindumps, then you may find that there are the respective features and detailed disparities of our 350-401 Collection Pdf simulating questions. And you can free donwload the demos to have a look.
With the rapid development of society, people pay more and more attention to knowledge and skills. So every year a large number of people take 350-401 Collection Pdf tests to prove their abilities.
350-401 PDF DEMO:
QUESTION NO: 1
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 3
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
IBM C1000-138 - Holding a professional certificate means you have paid more time and effort than your colleagues or messmates in your major, and have experienced more tests before succeed. Splunk SPLK-1005 - Although everyone hopes to pass the exam, the difficulties in preparing for it should not be overlooked. We want to finish long term objectives through customer satisfaction and we have achieved it already by our excellent HP HPE7-A05 exam questions. Obtaining the Dell D-PWF-RDY-A-00 certification is not an easy task. Oracle 1z1-106 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) study questions provide free trial service for consumers.
Updated: May 28, 2022