Because, after all, 350-401 Certificate Exam is a very important certified exam of Cisco. But 350-401 Certificate Exam exam is not so simple. Cisco certification 350-401 Certificate Exam exam can give you a lot of change. So their validity and authority are unquestionable. Our 350-401 Certificate Exam learning materials are just staring points for exam candidates, and you may meet several challenging tasks or exams in the future about computer knowledge, we can still offer help. In order to pass Cisco certification 350-401 Certificate Exam exam disposably, you must have a good preparation and a complete knowledge structure.
Now Cisco 350-401 Certificate Exam certification test is very popular.
I’m sure our 24-hour online service will not disappoint you as we offer our service 24/7 on our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Certificate Exam study materials. So our IT technicians of Omgzlook take more efforts to study Test 350-401 Format exam materials. All exam software from Omgzlook is the achievements of more IT elite.
Our company boosts an entire sale system which provides the links to the clients all around the world so that the clients can receive our products timely. Once the clients order our 350-401 Certificate Exam cram training materials we will send the products quickly by mails. The clients abroad only need to fill in correct mails and then they get our products conveniently.
Cisco 350-401 Certificate Exam study material is suitable for all people.
The free demos of our 350-401 Certificate Exam study materials show our self-confidence and actual strength about study materials in our company. Besides, our company's website purchase process holds security guarantee, so you needn’t be anxious about download and install our 350-401 Certificate Exam exam questions. With our company employees sending the link to customers, we ensure the safety of our 350-401 Certificate Exam guide braindumps that have no virus.
So a wise and diligent person should absorb more knowledge when they are still young. At present, our 350-401 Certificate Exam study prep has gained wide popularity among different age groups.
350-401 PDF DEMO:
QUESTION NO: 1
Which description of an SD-Access wireless network infrastructure deployment is true?
A. The wireless client is part of the fabric overlay.
B. The access point is part of the fabric underlay.
C. The WLC is part of the fabric underlay.
D. The access point is part the fabric overlay.
Answer: B
QUESTION NO: 2
Which statement about a fabric access point is true?
A. It is in local mode an must connected directly to the fabric edge switch.
B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
C. It is in FlexConnect mode and must be connected directly to the fabric border node.
D. It is in local mode an must be connected directly to the fabric border node.
Answer: A
Explanation:
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric
WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html
QUESTION NO: 3
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 4
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
Considering all customers’ sincere requirements, VMware 2V0-33.22PSE test question persist in the principle of “Quality First and Clients Supreme” all along and promise to our candidates with plenty of high-quality products, considerate after-sale services as well as progressive management ideas. CompTIA 220-1101 - They can even broaden amplitude of your horizon in this line. What are you waiting for? As long as you decide to choose our CompTIA N10-008 exam questions, you will have an opportunity to prove your abilities, so you can own more opportunities to embrace a better life. With our Fortinet FCSS_SASE_AD-23 study questions for 20 to 30 hours, then you can be confident to pass the exam for sure. CheckPoint 156-215.81.20 - Our leading experts aim to provide you the newest information in this field in order to help you to keep pace with the times and fill your knowledge gap.
Updated: May 28, 2022