Omgzlook Cisco 350-401 Cert Exam exam questions are compiled according to the latest syllabus and the actual 350-401 Cert Exam certification exam. We are also constantly upgrade our training materials so that you could get the best and the latest information for the first time. When you buy our 350-401 Cert Exam exam training materials, you will get a year of free updates. Our 350-401 Cert Exam study materials are not only as reasonable priced as other makers, but also they are distinctly superior in the many respects. With tens of thousands of our loyal customers supporting us all the way, we believe we will do a better job in this career. Candidates who participate in the Cisco 350-401 Cert Exam certification exam, what are you still hesitant？Just do it quickly!
CCNP Enterprise 350-401 Everyone has their own dreams.
Most of the experts have been studying in the professional field for many years and have accumulated much experience in our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Cert Exam practice questions. With it, you will pass the exam easily. If you pass the exam, you will have the self-confidence, with the confidence you will succeed.
Our product is of high quality and the passing rate and the hit rate are both high. Nowadays the requirements for jobs are higher than any time in the past. The job-hunters face huge pressure because most jobs require both working abilities and profound major knowledge.
Cisco 350-401 Cert Exam - If you fail, don't forget to learn your lesson.
All exam materials in 350-401 Cert Exam learning materials contain PDF, APP, and PC formats. They have the same questions and answers but with different using methods. If you like to take notes randomly according to your own habits while studying, we recommend that you use the PDF format of our 350-401 Cert Exam study guide. And besides, you can take it with you wherever you go for it is portable and takes no place. So the PDF version of our 350-401 Cert Exam exam questions is convenient.
Don't hesitate to get help from our customer assisting. Downloading the 350-401 Cert Exam free demo doesn't cost you anything and you will learn about the pattern of our practice exam and the accuracy of our 350-401 Cert Exam test answers.
350-401 PDF DEMO:
QUESTION NO: 1
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 2
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 3
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 4
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 5
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
We often ask, what is the purpose of learning? Why should we study? Why did you study for Microsoft MB-330exam so long? As many people think that, even if one day we forget the formula for the area of a triangle, we can still live very well, but if it were not for the knowledge of learning Microsoft MB-330 exam and try to obtain certification, how can we have the opportunity to good to future life? So, the examination is necessary, only to get the test Microsoft MB-330 certification, get a certificate, to prove better us, to pave the way for our future life. So we prepared top Microsoft DP-203-KR pdf torrent including the valid questions and answers written by our certified professionals for you. With our APMG-International Better-Business-Cases-Practitioner practice engine for 20 to 30 hours, we can claim that you will be quite confident to attend you exam and pass it for sure for we have high pass rate as 98% to 100% which is unmatched in the market. Veeam VMCE_v12 online test engine is selected by many candidates because of its intelligence and interactive features. EMC D-CI-DS-23 - The clients can choose the version which supports their equipment on their hands to learn.
Updated: May 28, 2022