All knowledge contained in our 350-022 Exam Questions practice engine is correct. Our workers have checked for many times. Also, we will accept annual inspection of our 350-022 Exam Questions exam simulation from authority. Therefore, with our 350-022 Exam Questions study materials, you can easily find the key content of the exam and review it in a targeted manner so that you can successfully pass the 350-022 Exam Questions exam. We have free demos of the 350-022 Exam Questions exam materials that you can try before payment. Why not give our Cisco study materials a chance? Our products will live up to your expectations.
CCIE 350-022 They compile each answer and question carefully.
Our Cisco certification 350-022 - CCIE Written, Service Provider: DSL Exam Questions exam question bank is produced by Omgzlook's experts's continuously research of outline and previous exam. We can guarantee that our study materials will be suitable for all people and meet the demands of all people, including students, workers and housewives and so on. If you decide to buy and use the 350-022 Best Preparation Materials training materials from our company with dedication on and enthusiasm step and step, it will be very easy for you to pass the exam without doubt.
We can let you spend a small amount of time and money and pass the IT certification exam at the same time. Selecting the products of Omgzlook to help you pass your first time Cisco certification 350-022 Exam Questions exam is very cost-effective. Omgzlook provide a good after-sales service for all customers.
Cisco 350-022 Exam Questions - Omgzlook can give you a brighter future.
Our company have the higher class operation system than other companies, so we can assure you that you can start to prepare for the 350-022 Exam Questions exam with our study materials in the shortest time. In addition, if you decide to buy 350-022 Exam Questions exam materials from our company, we can make sure that your benefits will far exceed the costs of you. The rate of return will be very obvious for you. We sincerely reassure all people on the 350-022 Exam Questions test question from our company and enjoy the benefits that our study materials bring. We believe that our study materials will have the ability to help all people pass their 350-022 Exam Questions exam and get the related exam in the near future.
The society has an abundance of capable people and there is a keen competition. Don't you feel a lot of pressure? No matter how high your qualifications, it does not mean your strength forever.
350-022 PDF DEMO:
QUESTION NO: 1
The following are wire sizes used in telephone company cables. Which will allow the greatest
"reach" (distance) in DSL service?
A.24 AWG (0.5 mm)
B.26 AWG (0.4 mm)
C.A line that is 50% of #24 (0.5mm) and 50 % of #26 (0.4mm).
D.None of the above will allow enough reach for DSL service.
Correct:A
QUESTION NO: 2
What effect do load coils in a telephone line have on DSL service?
A.Load coils cause low trained rates for ADSL (CAP or DMT), but do not degrade SDSL, SHDSL, or IDSL transmission.
B.Load coils in the telephone line can prevent any DSL modem from training up to an ATU-C port.
C.Load coils cause low upstream rates, but do not degrade downstream rates.
D.Load coils cause low downstream rates, but do not degrade upstream rates.
E.Load coils cause low trained rates for SDSL, SHDSL, or IDSL, but do not degrade ADSL (CAP or DMT) transmission.
Correct:B
QUESTION NO: 3
What is the effect of changing DMT interleaved delay from 16 milliseconds to 2 milliseconds?
A.Fewer ATM PVCs can be provisioned on the DSL line.
B.Latency is reduced, but error correction effectiveness may also be reduced.
C.Latency remains the same, but faster error correction occurs.
D.Latency remains the same, but throughput is increased.
Correct:B
QUESTION NO: 4
A DSL customer has subscribed to a service that provides 2 mbps downstream and 256 kbps upstream. The cable length is 10 kft (3 km). The customer reports that file transfers on the DSL line seem slower than normal in recent days. After reviewing the DSL profile parameters for the
DSL port, and the actual status of the line, what is the possible reason why the subscriber's data rates are slower than usual?DSLAM#show dsl int atm 1/1DMT profile parametersMaximum
Bitrates:Interleave Path: downstream: 2048 kb/s, upstream: 256 kb/sFast Path: downstream: 0 kb/s, upstream: 0 kb/sMinimum Bitrates:Interleave Path: downstream: 0 kb/s, upstream: 0 kb/sFast Path: downstream: 0 kb/s, upstream: 0 kb/sMargin: downstream: 6 dB, upstream: 6 dBInterleaving Delay: downstream: 16000 usecs, upstream: 16000 usecsCheck Bytes
(FEC):Interleave Path: downstream: 16, upstream: 16Fast Path: downstream: 0, upstream: 0R-S
Codeword Size: downstream: auto, upstream: autoTrellis Coding: DisabledOverhead Framing:
Mode 3Operating Mode: AutomaticTraining Mode: QuickMinrate blocking: DisabledSNR
Monitoring: DisabledStatus:Bitrates:Interleave Path: downstream: 640 kb/s, upstream: 256 kb/sFast Path: downstream: 0 kb/s, upstream: 0 kb/sMargin: downstream: 6 dB, upstream: 9 dBAttenuation: downstream: 45 dB, upstream: 31 dBInterleave Delay: downstream: 16000 usecs, upstream: 16000 usecTransmit Power: downstream: 19.4 dB, upstream: 12.0 dBCheck Bytes
(FEC):Interleave Path: downstream: 16, upstream: 16Fast Path: downstream: 0, upstream: 0R-S
Codeword Size: downstream: 1, upstream: 8Trellis Coding: Not In UseOverhead Framing: Mode
3Line Fault: NONEOperating Mode: ITU G dmt Issue 1Line Type: Interleaved Only
A.The signal-to-noise margin on the line will not allow downstream DSL rates faster than 640 kbps. If the subscriber's service was in fact faster at some time, then something has changed in the line characteristics or noise spectrum.
B.The subscriber is provisioned for 640 kbps downstream, and the service appears to be working normally. The problem is apparently not related to the DSL (physical layer) part of the service.
C.The service is running in G.DMT, and 640 kbps is normal for the subscriber's cable length. Change the mode to ANSI T1.413 for faster rates.
D.The DSL profile is set for 16 milliseconds interleave delay. Change the interleave delay to 0, or change the profile to fastpath for faster line rates.
Correct:A
QUESTION NO: 5
Three of the following are common symptoms of a bridge tap ("half tap") on a DSL line. Which three are symptoms that result from placing a bride tap on a DSL line?
A.The line may not train.
B.The DSL service will interfere with telephone (POTS) service on the same line.
C.DSL line rates will be lower than expected (lower than provisioned).
D.The line may have degraded DSL service, but POTS service may appear normal.
Correct:A C D
Next, through my introduction, I hope you can have a deeper understanding of our SAP C-C4H62-2408 learning quiz. Cisco 700-805 - So you have to seize this opportunity of Omgzlook. ServiceNow CAD - And you can free download the demo s to check it out. Genesys GCX-SCR - The high quality exam dumps can produce a wonderful effect. ServiceNow CIS-CSM - Details determine success or failure, so our every detail is strictly controlled.
Updated: May 27, 2022