So we take this factor into consideration, develop the most efficient way for you to prepare for the 200-301 Test Notes exam, that is the real questions and answers practice mode, firstly, it simulates the real Cisco Certified Network Associate Exam test environment perfectly, which offers greatly help to our customers. Secondly, it includes printable PDF Format, also the instant access to download make sure you can study anywhere and anytime. All in all, high efficiency of 200-301 Test Notes exam material is the reason for your selection. Our expert team boosts profound industry experiences and they use their precise logic to verify the test. They provide comprehensive explanation and integral details of the answers and questions. And on your way to success, they can offer titanic help to make your review more relaxing and effective.
CCNA 200-301 So their perfection is unquestionable.
If you free download the demos of the 200-301 - Cisco Certified Network Associate Exam Test Notes exam questions, I believe you have a deeper understanding of our products, and we must also trust our 200-301 - Cisco Certified Network Associate Exam Test Notes learning quiz. Even if you know little about computers, you can easily begin to do exercises of the New 200-301 Dumps real exam dumps. Also, we have invited for many volunteers to try our study materials.
If you encounter some problems when using our 200-301 Test Notes study materials, you can also get them at any time. After you choose 200-301 Test Notes preparation questions, professional services will enable you to use it in the way that suits you best, truly making the best use of it, and bringing you the best learning results. The content system of 200-301 Test Notes exam simulation is constructed by experts.
Cisco 200-301 Test Notes - We are keeping advancing with you.
You can free download part of practice questions and answers about Cisco certification 200-301 Test Notes exam to test our quality. Omgzlook can help you 100% pass Cisco certification 200-301 Test Notes exam, and if you carelessly fail to pass Cisco certification 200-301 Test Notes exam, we will guarantee a full refund for you.
It is well known that even the best people fail sometimes, not to mention the ordinary people. In face of the 200-301 Test Notes exam, everyone stands on the same starting line, and those who are not excellent enough must do more.
200-301 PDF DEMO:
QUESTION NO: 1
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 3
Refer to the exhibit. After you apply the given configuration to arouter, the DHCP clients behind the device connot communicate with hosts outside of their subnet.
Which action is most likely to correct the problem?
A. configure the default gateway
B. Configure the dns server on the same subnet as the clients
C. Activate the dhcp pool
D. Correct the subnet mask
Answer: A
QUESTION NO: 4
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 5
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
Omgzlook is a website which can help you quickly pass Cisco certification Splunk SPLK-2003 exams. What you will never worry about is that the quality of SAP C-THR86-2405 exam dumps, because once you haven’t passed exam, we will have a 100% money back guarantee. Omgzlook is a website which can help you save time and energy to rapidly and efficiently master the Cisco certification Microsoft AI-102 exam related knowledge. Our CompTIA CAS-005 study materials are compiled and tested by our expert. Feedbacks of many IT professionals who have passed Cisco certification SAP C-THR94-2405 exam prove that their successes benefit from Omgzlook's help.
Updated: May 28, 2022