So, hurry to take action. Have you signed up for Cisco 200-301 Test Guide exam? Will masses of reviewing materials and questions give you a headache? Omgzlook can help you to solve this problem. It is absolutely trustworthy website. So you totally can control the 200-301 Test Guide study materials flexibly. It is enough to wipe out your doubts now. Many times getting a right method is important and more efficient than spending too much time and money in vain.
CCNA 200-301 Stop hesitating.
Accompanying with our 200-301 - Cisco Certified Network Associate Exam Test Guide exam dumps, we educate our candidates with less complicated Q&A but more essential information, which in a way makes you acquire more knowledge and enhance your self-cultivation. The pass rate of our products increased last year because of its reliability. Our website provides the most up-to-date and accurate New 200-301 Test Labs dumps torrent which are the best for passing certification test.
We did not gain our high appraisal by our 200-301 Test Guide exam practice for nothing and there is no question that our 200-301 Test Guide practice materials will be your perfect choice. First, you can see the high hit rate on the website that can straightly proved our 200-301 Test Guide study braindumps are famous all over the world. Secondly, you can free download the demos to check the quality, and you will be surprised to find we have a high pass rate as 98% to 100%.
Cisco 200-301 Test Guide - We look forward to meeting you.
Get the latest 200-301 Test Guide actual exam questions for 200-301 Test Guide Exam. You can practice the questions on practice software in simulated real 200-301 Test Guide exam scenario or you can use simple PDF format to go through all the real 200-301 Test Guide exam questions. Our products are better than all the cheap 200-301 Test Guide Exam braindumps you can find elsewhere, try free demo. You can pass your actual 200-301 Test Guide Exam in first attempt. Our 200-301 Test Guide exam material is good to pass the exam within a week. Omgzlook is considered as the top preparation material seller for 200-301 Test Guide exam dumps, and inevitable to carry you the finest knowledge on 200-301 Test Guide exam certification syllabus contents.
As for the safety issue of 200-301 Test Guide exam materials you are concerned about is completely unnecessary. You can rest assured to buy and use it.
200-301 PDF DEMO:
QUESTION NO: 1
Which network allows devices to communicate without the need to access the Internet?
A. 209.165.201.0/24
B. 192.0.0.0/8
C. 172.28.0.0/16
D. 1729.0.0/16
Answer: C
Explanation:
This question asks about the private ranges of IPv4 addresses. The private ranges of each class of IPv4 are listed below:
Class A private IP address ranges from 10.0.0.0 to 10.255.255.255 Class B private IP address ranges from 172.16.0.0 to 172.31.255.255 Class C private IP address ranges from 192.168.0.0 to
192.168.255.255 Only the network 172.28.0.0/16 belongs to the private IP address (of class B).
QUESTION NO: 2
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
QUESTION NO: 3
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 4
Which set of action satisfy the requirement for multi-factor authentication?
A. The user enters a user name and password and then re-enters the credentials on a second screen
B. The user swipes a key fob, then clicks through an email link
C. The user enters a user name and password, and then clicks a notification in an authentication app on a mobile device
D. The user enters a PIN into an RSA token, and then enters the displayed RSA key on a login screen
Answer: C
Explanation:
This is an example of how two-factor authentication (2FA) works:
1. The user logs in to the website or service with their username and password.
2. The password is validated by an authentication server and, if correct, the user becomes eligible for the second factor.
3. The authentication server sends a unique code to the user's second-factor method (such as a smartphone app).
4. The user confirms their identity by providing the additional authentication for their second-factor method.
QUESTION NO: 5
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
If you are unfamiliar with our Microsoft MB-210 study materials, please download the free demos for your reference, and to some unlearned exam candidates, you can master necessities by our Microsoft MB-210 training guide quickly. We believe that the unique questions and answers of our Huawei H28-155_V1.0 exam materials will certainly impress you. AAPC CPC - As we all know that the better the products are, the more proffesional the according services are. SAP C-BW4H-2404 - Also, we have our own research center and experts team. There are so many advantages of our VMware 6V0-32.24 actual exam, and you are welcome to have a try!
Updated: May 28, 2022