Our research and development team not only study what questions will come up in the 200-301 Test Duration exam, but also design powerful study tools like exam simulation software.The content of our 200-301 Test Duration practice materials is chosen so carefully that all the questions for the exam are contained. And our 200-301 Test Durationstudy materials have three formats which help you to read, test and study anytime, anywhere. This means with our products you can prepare for 200-301 Test Duration exam efficiently. Because it can help you prepare for the 200-301 Test Duration exam. If you want to succeed in your exam and get the related exam, you have to set a suitable study program. We boost professional expert team to organize and compile the 200-301 Test Duration training guide diligently and provide the great service.
CCNA 200-301 Our research materials have many advantages.
Through all these years' experience, our 200-301 - Cisco Certified Network Associate Exam Test Duration training materials are becoming more and more prefect. You really can't find a more cost-effective product than New 200-301 Test Voucher learning quiz! Our company wants more people to be able to use our products.
All exams from different suppliers will be easy to handle. Actually, this 200-301 Test Duration exam is not only practical for working or studying conditions, but a manifest and prestigious show of your personal ability. Passing the 200-301 Test Duration exam has never been so efficient or easy when getting help from our 200-301 Test Duration training materials.
Cisco 200-301 Test Duration - Firstly, PDF version is easy to read and print.
In the matter of quality, our 200-301 Test Duration practice engine is unsustainable with reasonable prices. Despite costs are constantly on the rise these years from all lines of industry, our 200-301 Test Duration learning materials remain low level. That is because our company beholds customer-oriented tenets that guide our everyday work. The achievements of wealth or prestige is no important than your exciting feedback about efficiency and profession of our 200-301 Test Duration study guide.
The next thing you have to do is stick with it. 200-301 Test Duration training materials will definitely live up to your expectations.
200-301 PDF DEMO:
QUESTION NO: 1
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 3
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 4
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 5
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
An increasing number of people have become aware of that it is very important for us to gain the Microsoft SC-300 exam questions in a short time. For the complex part of our ISQI CT-AI_v1.0_World exam question, you may be too cumbersome, but our system has explained and analyzed this according to the actual situation to eliminate your doubts and make you learn better. And the Software version of our SAP C_SIGDA_2403 study materials have the advantage of simulating the real exam, so that the candidates have more experience of the practicing the real exam questions. With all types of Salesforce Public-Sector-Solutions test guide selling in the market, lots of people might be confused about which one to choose. ASQ CQE-KR - Don't doubt about it.
Updated: May 28, 2022