Every addition or subtraction of 200-301 Test Discount exam questions in the exam syllabus is updated in our braindumps instantly. Practice on real 200-301 Test Discount exam questions and we have provided their answers too for your convenience. If you put just a bit of extra effort, you can score the highest possible score in the real 200-301 Test Discount exam because our 200-301 Test Discount exam preparation dumps are designed for the best results. This means with our products you can prepare for exams efficiently and at the same time you will get 100% success for sure. If you desire a 200-301 Test Discount certification, our products are your best choice. What is more, it is our mission to help you pass the exam.
CCNA 200-301 It is your right time to make your mark.
Secondly, since our 200-301 - Cisco Certified Network Associate Exam Test Discount training quiz appeared on the market, seldom do we have the cases of customer information disclosure. Besides, without prolonged reparation you can pass the Exam 200-301 Tests exam within a week long. Everyone's life course is irrevocable, so missing the opportunity of this time will be a pity.
The questions of our 200-301 Test Discount guide questions are related to the latest and basic knowledge. What’s more, our 200-301 Test Discount learning materials are committed to grasp the most knowledgeable points with the fewest problems. So 20-30 hours of study is enough for you to deal with the exam.
Cisco 200-301 Test Discount - You can consult our staff online.
The most interesting thing about the learning platform is not the number of questions, not the price, but the accurate analysis of each year's exam questions. Our 200-301 Test Discount guide dump through the analysis of each subject research, found that there are a lot of hidden rules worth exploring, this is very necessary, at the same time, our 200-301 Test Discount training materials have a super dream team of experts, so you can strictly control the proposition trend every year. In the annual examination questions, our 200-301 Test Discount study questions have the corresponding rules to summarize, and can accurately predict this year's test hot spot and the proposition direction. This allows the user to prepare for the test full of confidence.
They can greatly solve your problem-solving abilities. Actually our 200-301 Test Discount study materials cover all those traits and they are your prerequisites for successful future.
200-301 PDF DEMO:
QUESTION NO: 1
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 2
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 3
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
QUESTION NO: 4
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 5
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
Our Salesforce B2C-Commerce-Developer learning reference files not only provide a single learning environment for users, but also create a learning atmosphere like home, where you can learn and communicate easily. Do not satisfied with using shortcuts during your process, regular practice with our Cisco 820-605 exam prep will be easy. EC-COUNCIL 312-40 - Your exam results will help you prove this! If you come to visit our website more times, you will buy our APMG-International Better-Business-Cases-Practitioner practice engine at a more favorable price. Docker DCA - So our product is a good choice for you.
Updated: May 28, 2022