We Promise we will very happy to answer your question on our 200-301 Test Bootcamp exam braindumps with more patience and enthusiasm and try our utmost to help you out of some troubles. So don’t hesitate to buy our {Examcode} study materials, we will give you the high-quality product and professional customer services. As long as you study with our200-301 Test Bootcamp learning guide, you will be sure to get your dreaming certification. The key point is that you are serious on our 200-301 Test Bootcamp exam questions and not just kidding. Our 200-301 Test Bootcamp practice engine can offer you the most professional guidance, which is helpful for your gaining the certificate. The passing rate of our study material is up to 99%.
200-301 Test Bootcamp actual test guide is your best choice.
CCNA 200-301 Test Bootcamp - Cisco Certified Network Associate Exam That is because our company beholds customer-oriented tenets that guide our everyday work. 200-301 Test Dumps training materials will definitely live up to your expectations. Not only our 200-301 Test Dumps study materials contain the latest exam questions and answers, but also the pass rate is high as 98% to 100%.
Because all of them have realized that it is indispensable to our daily life and work. With the high employment pressure, more and more people want to ease the employment tension and get a better job. The best way for them to solve the problem is to get the 200-301 Test Bootcamp certification.
Cisco 200-301 Test Bootcamp - More useful certifications mean more ways out.
We attract customers by our fabulous 200-301 Test Bootcamp certification material and high pass rate, which are the most powerful evidence to show our strength. We are so proud to tell you that according to the statistics from our customers’ feedback, the pass rate among our customers who prepared for the exam with our 200-301 Test Bootcamp test guide have reached as high as 99%, which definitely ranks the top among our peers. Hence one can see that the Cisco Certified Network Associate Exam learn tool compiled by our company are definitely the best choice for you.
Imagine, if you're using a 200-301 Test Bootcamp practice materials, always appear this or that grammar, spelling errors, such as this will not only greatly affect your mood, but also restricted your learning efficiency. Therefore, good typesetting is essential for a product, especially education products, and the 200-301 Test Bootcamp test material can avoid these risks very well.
200-301 PDF DEMO:
QUESTION NO: 1
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 3
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 4
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 5
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
All in all, high efficiency of HP HP2-I65 exam material is the reason for your selection. CompTIA 220-1101 - So our service team is professional and top-tanking. SAP C_S4FTR_2023 - And on your way to success, they can offer titanic help to make your review more relaxing and effective. SAP C-TS4FI-2023 - You will find that learning is becoming interesting and easy. The successful outcomes are appreciable after you getting our SAP C_S43_2022 exam prep.
Updated: May 28, 2022