In order to help customers solve the problem, our Cisco Certified Network Associate Exam test torrent support the printing of page. We will provide you with three different versions, the PDF version allow you to switch our 200-301 Study Guide study torrent on paper. You just need to download the PDF version of our 200-301 Study Guide exam prep, and then you will have the right to switch study materials on paper. After you have successfully paid, you can immediately receive 200-301 Study Guide test guide from our customer service staff, and then you can start learning immediately. Many students often start to study as the exam is approaching. In order to gain the certification quickly, people have bought a lot of study materials, but they also find that these materials don’t suitable for them and also cannot help them.
CCNA 200-301 Many customers may be doubtful about our price.
Even if you have a week foundation, I believe that you will get the certification by using our 200-301 - Cisco Certified Network Associate Exam Study Guide study materials. Our exam questions just need students to spend 20 to 30 hours practicing on the platform which provides simulation problems, can let them have the confidence to pass the Valid Test 200-301 Bootcamp Materials exam, so little time great convenience for some workers. It must be your best tool to pass your exam and achieve your target.
You are the best and unique in the world. Just be confident to face new challenge! As the old saying tells that, he who doesn't go advance will lose his ground.
Cisco 200-301 Study Guide - Perhaps you do not understand.
For years our team has built a top-ranking brand with mighty and main which bears a high reputation both at home and abroad. The sales volume of the 200-301 Study Guide test practice guide we sell has far exceeded the same industry and favorable rate about our products is approximate to 100%. Why the clients speak highly of our 200-301 Study Guide exam dump? Our dedicated service, high quality and passing rate and diversified functions contribute greatly to the high prestige of our products. We provide free trial service before the purchase, the consultation service online after the sale, free update service and the refund service in case the clients fail in the test.
As long as you are convenient, you can choose to use a computer to learn, you can also choose to use mobile phone learning. No matter where you are, you can choose your favorite equipment to study our 200-301 Study Guide learning materials.
200-301 PDF DEMO:
QUESTION NO: 1
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 3
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 4
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 5
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
Salesforce Industries-CPQ-Developer - The fact is that if you are determined to learn, nothing can stop you! Microsoft SC-200 - Why is that? The answer is that you get the certificate. You may find that there are a lot of buttons on the website which are the links to the information that you want to know about our Netskope NSK300 exam braindumps. Secondly, the price of the Microsoft DP-203-KR study materials is favourable. And if you don't know which one to buy, you can free download the demos of the ISTQB ISTQB-CTFL study materials to check it out.
Updated: May 28, 2022